J-Power(SKYANGEL) F-8 "Crusader" AREA88 "ShinKazama" TYPE

Spec.

EDF
Moter:E-MAX B2030-19
Impeler:GWS EDF50
Case:stock

ESC
stock(20A)

BATT
800mAh4s25-35C or 850mAh4s35-70C

Servo
Aileron:Hitec HS-45HB
Elevator:HENGE MD933

主観たっぷりのインプレ
若干ノーズが重い印象はあるものの、エルロンにデファレンシャルを30%程入れたら旋回時の巻き込みは気にならないレベルに。グリグリやりたい向きは若干下げた方が良いと­思うけど(好みで5～10mm程度かな？)、指定の位置だと少々煽られても抑えが効くので先ずは指定の重心位置で飛ばしてみるのがお勧め。
因みに吊るし状態のグレー単色では距離を出すと姿勢の確認が難しくなりそうなので、こんなモディファイも意外に有効かも？

Category:

Autos & Vehicles

Tags:

• ♂いぬ♂
• ラジコン
• J-Power
• SKYANGEL
• F-8
• Crusader
• AREA88
• 風間真

[BLADEMANDAD]

hello inusanchi san, my crusader (Same as yours) coundn't fly, it;s on stock power systems from hobbyking, any tips to get it to fly?

[inusanchi]

@BLADEMANDAD If stock is in a state, is it 3cell?

If stock is in a state, is it 3cell?

Because a thrust is not given without a turn being finished if the balance of the impeller is bad, at first please check it.

I should fly without a problem whether the CG position is appropriate whether a rudder corner and neutral are appropriate if the neighborhood does not have any problem.

Please do its best!

[BLADEMANDAD]

@inusanch Stock state:

3 cell (11.1v li-po)

esc- 20a

Motor kv - unknown (i got a pink outrunner motor)

the balance is okay, minor vibrations, but it still can't lift off

[inusanchi]

@BLADEMANDAD If it is a stock motor, KV is 4200.

Ability for electric discharge of the battery may be low without a problem in the balance of the EDF unit.

Please check it in some cases the setting of the throttle range is not done, and not to become the full throttle because there can be the thing.

[BLADEMANDAD]

@inusanchi i did check the throttle throw, I;m using HITEC optic 6, My throttle was on max +ve throw of 125%, esc not programmable, wasn't able to program the throttle range.

did you change your motor? i have a feeling the stock motor wasn't able to generate enough thrust,,, (It's the one with the pink body stem)

very good paint work by the way, how did you do the unicorn?

[inusanchi]

@BLADEMANDAD If the setting of the throttle range is normal, I have possibilities having poor motor.

I use Inrunner Motor of E-MAX. I think that B2040-13 is good if 3cell and B2030-19 is good if 4cell.

The unicorn had you print a sticker on a friend.

[inusanchi]

@adegsx11 The EDF unit is not stock as the last of the animation includes it, and the battery is 4cell.

But the body is almost stock other than the painting.

Thank you.

[adegsx11]

Is that stock ? flies quicker than my f-86...

not sure on the intake size but a nip/tuck will fix that ..

looks good

[inusanchi]

@briankanaga You're welcome

[briankanaga]

thanks.