Fleece Performance Duramax Cheetah Turbo

Driving the speed limit :D

Category:

Autos & Vehicles

Tags:

• Duramax
• Turbo
• Drag
• Sled
• Pull
• Twins
• Smoke

[redzone76]

i want to see a video of your truck revving to 5000 rpm's. it would not hold together unless you have extreme internal work.

[BraydenFleece]

@redzone76

You should get out more..

We spin stock duramax's past 5000 rpm's all day. The bottom end's will handle it fine. It's the valve train we need to address when we want to spin higher. On fully built engines with rod's, piston's and valvetrain upgrades we've seen 6000rpm.

If you don't know what you're talking about, why even post anything?

[carter1000001]

y is the red line all the way at 5000 RPM'S i thought a stock d-max red lines at 3200 RPM's????

[BraydenFleece]

Who said that this was a stock Dmax? It makes 630hp/1147tq at the rear wheels.. Dyno tested... The truck will actually rev higher than 5000... :D but there is no real need for it yet.

[powerlifter46]

i like how some people call duramax shit, yet they can run a 13 sec 1/4 with just a ppe..and the other 2 small things not worth naming

[PrimitiveStrikeForce]

@powerlifter46 Ha, what are the other two?

[95chevyboy]

@JustinHansen6669 what are you talking about? "06 was still pretty basic with trying out the allison?" since 2001 when the duramax hit the streets, the allison has pretty much been the same expect alitte different tuning and in 06 they came out with the 6speed allison. and the factory high idle mode was put into trucks from factory when the second generation duramax(LLY 2004.5-2005) came out.

[db1415]

@carter1000001

the 3200 redline is for when the truck is in towhaul mode to show you how much the truck is holding back...if you drive a dmax and haul anything put it in towhaul and let it down shift. it will go past the 3200 mark. as for stock dmax...well welcome to the world of mods, you dont get that hp with a stock struck..lol

[JustinHansen6669]

@FriscoJarretts, if your talking about chevrolet, then i do believe 08-09... 06 was still pretty basic with tryin out the allison. in 2007 the current allison was put in and a few other minor modifications were done (ect- factory high idle switch) then late 2007 they started the current body styles.

[cameron947]

@floppycock9 No its not. PPE, makes programmer's and other performance part's. The PPE dual fueler kit's use bosch CP3 injection pump's. As far as I know PPE donesn't make their own.

[floppycock9]

@cameron947 no its a high pressure fuel pump

[cameron947]

@floppycock9 PPE is the programer. He probably mean's exhaust and like a cold air intake.

[cameron947]

@floppycock9 PPE is the programer.

[floppycock9]

@powerlifter46 what an exhaust and programmer

[FriscoJarretts]

@carter1000001

When you are hauling something and you use the engine brake in towing mode the rpms can shoot that high, and it is normal. This started in 2006 I think. Owners were freaking out that they were tearing up their engines.