Somenzini Yak 54 69" wingspan
Loading...
4,410
Loading...
Uploader Comments (klinb)
see all
All Comments (8)
-
What kind of motor mount is that in the pic?
I am slightly concerned that the choke butterfly may hit the firewall when opened so i was considering using standoffs or moving the fuel tank back and opening up the firewall a bit more?
do you have any closer/clearer pics of your motorbox strengthening?
Thanks
Ben
-
the cg should be how it should be.
-
26cc MVVS (EVO) gas engine
-
What engine? Gas or glow w/ pitts? Nice flying!
Loading...
hi klinb,I have just got one of these yaks and i am also going to fit a 26cc gasser in it.Did you do anything to the engine mounting box to beef it up?
Everywhere i read about this they say not to fit a 26cc to it because of vibration.I am doing it anyway but if you did strengthen the engine mount please let me know what you did.Thanks
konceppt 1 year ago
@konceppt yes you have to reinforce the motorbox. I added some balsa corners on the inside with a slow curing epoxy as well 2 carbon counterforts on the outside of the motor box as you can see in this image: imagebin.ca/img/a2wO_Nc.jpg
klinb 1 year ago
i think the motor you have on there is overkill. all you really would need is a YS 110S.
that plane flies perfectly with that motor in it
marlscarvin 3 years ago
yeh, but i wanted a gas engine on it. i hate glow's messiness. This engine is indeed overkill but only with this carbon prop, check my other vides where i changed the prop to wood and its less jumpy
klinb 3 years ago
Where exactly is the C of G on this flight? I am working my one backwards from the original trim but if you could tell me how far back your is, I would save a bit of time.
Cheers from Australia.
keithrussell 3 years ago
Not sure exactly where it is (its been a while since i built this bird, but i wouldnt say its too far from the one that the manual specified. I'm waiting for the summer (or warmer days) and i'll get to the flying field with her, once i do that i'll check the cg again and let you know. Thanks for commenting.
klinb 3 years ago