HHO DIY Hydrogen Production

http://www.rmcybernetics.com/projects/DIY_Devices/hho-hydrogen-water-fuel-cel...

Category:

Science & Technology

Tags:

• hho
• electrolysis
• hydrogen
• fuelcell
• water
• fuel
• electrodes
• diy

[MrRuzo214]

are you using a bridge rectifier? How many volts?

[rmcybernetics]

@MrRuzo214 No rectifier, it is powered from 12V batteries and a power pulse modulator.

[il51diablo]

@rmcybernetics Hello, can you give us the schema of this "power plus modulator"?

[rmcybernetics]

@il51diablo You can find all the information on our website

[bigwillchill]

does the water ever run out?

can it be plain water from the faucet or does it need a little bit of baking soda?

do you have to modify the engine fuel managment system to include hydrogen?

[rmcybernetics]

@bigwillchill This is tap water. I think you would need to modify the engine management as the oxygen sensor would change the fuel mix.

[twb74aol]

@cDog8766 and drilling stainless isnt the easiest thing either..these take alota work to actual make..you can buy kits and plates online already made if you want to spend the $..if you have the $ i would suggest it just because my time is $ and cost me more in time to make them than to buy them..i have alota fab tools so like to build things outa nothing and went the hard route to begin with and have better understanding of the unit and how it works.

[twb74aol]

@cDog8766 oh. for your question on the plates..steel prices go up and down daily..u want to use a 18 gauge 316l grade wich i priced at over $600 for a 4x8 sheet at a metal supplyer..its not really the easiest stuff to get ahold of.had to call around befor finding some.but found a local place that had some cut offs and purchased a couple 4 inch by 4 foot strips for $27 each. and had to cut down to my specs..pain in the ass. if u have a metal shear it isnt to bad.

[twb74aol]

@cDog8766 i have not purchased one from them tho so cant personally vouch for the effectiveness but i used there design and came up with good results..its a simple idea but takes alota time and understanding of the electrical science, chemical reactions that take place and safely delivering the fuel without messing up sensors on your car.so its not a wonder box cure all..i would ask about the plate spacing they used when building these..i would like to know for myself..

[twb74aol]

@cDog8766 for the $ i wish i had just bought theres and used it to check the mpg and then disect it to make my own copys with less trial and error..the rubber rings make a diff(alot of rubber ring actual conduct a small amount of electricity that screw up you output) but if you disect then you want to mesure the distance between plat with a digital or dial caliper so when putting back to geth it will be accurate..

[twb74aol]

@cDog8766 my best one was buying all the same material as the hho2u except the electrolite(i used baking soda its just easy to get) and at about 13 amps..i started with a 4" 21 plate..ended up taking many out untill i had 9 plates and diff # of pos,n, neg. plates and changeing the torque to change the space between the plates..

[twb74aol]

@cDog8766 i have built several diff designs all of wich produced diff amounts..and unless its something you would like to toy around with with many failures(not producing enough or being affective) as a hobby and spending money(my first i spent 65$ on material and countless hrs making adjustments.i did finally come up with 2 that produce over 1lpm but got caught up in remodeling house and a motorcycle wreck and never got to install to see actual mileage..

[twb74aol]

@cDog8766 google hho2u.com it has been the best site with the most legit helpful information i have found..