briggs engine blows after finding metal shaving in the oil

i dont want to do this but with a bad rod knock i know it's going to need a new crankshaft since my last video of metal shavings in the oil....i filled it up with new oil... after 5 minutes of runtime on the engine the oil is black along with metal shavings,so the previous owners did not add oil in this engine after winter storage, so it has to go, i got another briggs engine to swap, then i will take the parts off this one flywheel, housing, shroud, coil, carb, linkages, cylinder head, and fuel tank and put it on the other briggs engine that will replace this blown engine, it ran for a long good 15 minutes with kerosene in the engine, so i had to cut the video short down to 3:18, enjoy

Category:

Entertainment

Tags:

• briggs
• stratton
• rod
• knock
• bad
• blown
• kerosene
• swap
• metal
• shaving
• oil
• destroy
• destruction
• die
• death

[aztekwarrior518]

i'm pretty sure you could've still gotten a few months of mowin out of this mower . .

[SpiritsoftheWolf]

@aztekwarrior518, i could, but i got an engine waiting for a deck and took a few parts off this blown engine and slap on a donor engine and got a nicer mower, and on top of that, the original owner didn't checked the oil prior to starting the mower for the mowing season after storage, it had a lot of blowby, a lot of blowby mean very weak or no power to cut the grass

[fordescort1800]

i waited 3 mintes for this? i want to see it explode !!!!!!!! lol

[SpiritsoftheWolf]

@fordescort1800, yea i was hoping for that too LoL

[Pioneer833]

u could have cut the grass while waiting for it to blow idiot!

[SpiritsoftheWolf]

@Pioneer833, you could at least add a background on your channel, IDIOT! :P Xx BLOCKED xX

[caniwitech]

Did you see that wheelie?

[1972FordF150]

Hold on to your seat IT'S GONNA BLOW !!!!!

[bain5872]

Amazing what "YOU" can put a Briggs throug! Even though you added KEROZINE in the crank case it still soldered on in spit of a persons stupidity of pouring a jet fuel in the crank case. Grat Job! I'm sold!!! Briggs takes a F@#$# beating and keeps own Going! And Yes, it does. I've seen the very samething done before! Good Video!

[wheely132]

@1972FordF150 HAHAHAHA

[SpiritsoftheWolf]

@thefatbug1969, i tried to get it going again, and the keyway splitted so didn't wanna piss with it, need the frame for the new engine

[thefatbug1969]

because of this video.......after ten minutes the engine should run again....let the hot engine sit a few minutes to cool down a bit--then take it at the knife and try to turn-it should be possible again--if not a hard knock should help--then try to start up the engine again ("sound in the liner ist ok XD XD XD)--it should be possible after more attempts--dont forget more primer--the reward ist a "cool" running engine with a rough sound and if the oil gets hot again its "smokey joe" XD XD