Cheap Rust Repair With Old Appliances (no welding)
Loading...
Uploader Comments (LMXracer)
All Comments (28)
-
Son of a bitch ...I drive a 97 Suzuki SideKick which is the same as that Tracker and why is my floor starting to rust too
-
miller at 4:20....
-
Haha That's the best way to do it to if you cant weld. or don't have the tools to weld. It works but not the safest. As long as you get a good amount of screws in there it should be good.
-
Sorry that should not be repaired for the road. Make it a trail buggy.
-
That car doesn't look roadworthy...
-
i woulda cut out the old rust first bet that patch ain't doing soo good now ...you'll know for next time cheers :)
-
Speed limit signs and other traffic signs are good for replacing floor panels aswell. Know a fella that had somehow ran across 3 or 4 hundred old signs and for years we have used them for everything you can think of.. They are aluminum and some are thicker then others.
-
In England and Germany a car with as much rust as that would never pass the annual test. I did do a similar job to that in about 1970 but the annual test has been tightened up over the years. Originally it was just brakes, lights, steering and tyres. The horn had to work. Now its just about everything!. Pop rivets, self tap screws and brazing are not allowed. Emissions are also tested (at the end of the 1 hour test) Often the engine has cooled down and an unjustified failure is given.
-
Be careful as in some places the patch MUST be welded or a spot road check will get the vehicle towed
-
LOL 3:38 "see how it bends down?" after I smash it with my big red hammer!
14:47
Poor Man's Body Repair Part 1by old64goat41,542 views- 8:39
floor repair part 1.wmvby backyardjay21,663 views
- 5:36
How to repair a rust hole on your vehicle.by kurtscottage11,549 views
- 14:46
ARE YOU READY FOR PART 6 Of Poor Man's Bondo Body Work?by old64goat7,237 views
- 4:03
fix rust holes ...no weldingby TheTeddy21417,635 views
- 1:51
Rocker Panel Rust Repairby hazelwoodgarage36,645 views
- 2:00
DIY: Sheet Metal Repair & Patchingby 4DIYers8,487 views
- 9:33
Bondo: Working With Body Filler - 1 of 2by AutoRepairHelp10187,341 views
- 10:02
Patch Panels-Installation and Hand Forming Automotive Panels from howtoASAPby howtoasap54,189 views
- 16:55
More F150 Rust , Metal patchingby pisserschannel17,824 views
- 13:43
Poor Man's Bondo Body Work Series Part 1by old64goat11,931 views
- 3:34
rust spots on car paint,rust dots on car paint,rust on paint,removing rust spots,rust spots on carby rawbdiggity19,752 views
- 14:45
Door Skin Repairs from Rust: "The Correct Way"by Desertrodder17,344 views
- 9:21
Auto Body: Dent & Rust Repair - 3 of 6by AutoRepairHelp10170,512 views
- 5:29
how to do rust repair part 1, 1967 TO 1972 chevy truck rocker panelsby mobilehotrodrepair29,138 views
- 1:53
Installing a Floor Repair in the Carby ifitjams34,940 views
- 8:54
REPAIRING A WHEELARCHby paneljigman33,739 views
- 0:21
Wheel Well Rusted Outby ifitjams7,383 views
- 38:09
How To Repair Rusted Panels On A Vehicle.flvby pisserschannel47,583 views
Damn! That's a great idea! I have the same problem. I'm gonna do this until I can find a replacement floorpan to weld in. Just curious though -- what would you do about future rust on the pre-existing floor pan? I'm thinking of cutting it out and painting it with that POR15 stuff or some other protector. Any suggestions?
ingaman 1 year ago
@ingaman The best way to do it would be to sandblast it and spray it with metal etch. But POR 15 is a good alternative.
LMXracer 1 year ago