Vacuum Wax Injector Maxmatic WaxMax 4000 - Gold & Silver Jewelry - Lost Wax Casting - Prototyping

Maxmatic WaxMax 4000

The Marriage of Performance and Elegance

INNOVATION - CREATIVITY- TECHNOLOGY

THE NEW MAXMATIC WAX INJECTOR COMBINES THESE 3 QUALITIES with intelligent DESIGN

- INNOVATION: MAXMATIC was the inventor of the data saving memorising the injection parameters
- CREATIVITY: their elaborate designs illustrate the innovative capacity, creativity and technological excellence of MAXMATIC.
- TECHNOLOGY: WAXMAX 4000allows you to navigate the clear and detailed menu for all settings with the use of a joystick. As a state of the art toolof manufacturing, the WAXMAX 4000 is designed for the continuous production of the highest quality waxes

1500 waxes / day per operator, with several workers on the machine with different moulds

- Very easy to place the moulds in position
- Very easy and fast to change the clamp
- Very easy and efficient to operate with a joystick
- Clear and comprehensive display
- 4 pistons clamp

ADVANTAGES

- 100 programs
- Injection parameters memorised in a micro chip
- Reusable micro chip
- Perfect repeatable waxes with identical weights
- wax pot under vacuum to avoid air bubbles
- electronic control of the wax level in the pot
- control of the fluidity of the wax

EASY TO USE: no special training or experience

PROFITABILITY:
100 % SUCCESSFUL:

- No different weight on the waxes,
- Exactly the same dimensions and volumes
- No rejects

Possibility of 100 memories
Each micro chip in each mould has its memory.
This memory can be modified or increased at anytime.
The micro chip stocks and gives all the parameters for each injection according to each mould:

MEMORY

- tank pressure Bars (x,xx )
- type of wax
- melting point of the wax
- vacuum on or off (active or not)
- position automatic or manual(with or without clamp)
- tank temperature Degrees C (xx,x)
- injector temperature Degrees C (xx,x)
- fluidity of the wax
- clamp pressure Bars (x,xx)
- time for the clamp to go Minutes, seconds, 10th/se
- time under vacuum Minutes, seconds, 10th /se
- injection time Minutes, seconds,10th/se
- cooling time Minutes, seconds,10th/se

PARAMETERS OF EACH MOULD (micro chip)

N°of the mould
Name of the mould
Date of the mould
Name of the owner
Weight of the wax...

All these settings are adjusted with a joystick
All these parameters can be red, recorded and modified

MAXMATIC

TEL: 00.33.(0)5.56.20.43.44 or 00.33.(0)5.56.38.84.89

FAX: 00.33.(0)5.56.68.60.03

EMAIL: maxmaticfrance@hotmail.com - WEBSITE: www.maxmatic.fr

Category:

Science & Technology

Tags:

• maxmatic
• machine
• gold
• process
• prototyping
• vacuum
• wax
• injector
• casting
• microfusion
• foundry
• tag
• microchip
• mould
• silicon
• jewelry
• injection
• burn out
• furnace