Machines4wood.com Cutting, Grooving & Processing Alucobond

For more information - visit our website http://www.machines4wood.com or contact us directly:

Scott & Sargeant Woodworking Machinery Ltd
Blatchford Road, Horsham, RH13 5QR ENGLAND
Tel +44 (0) 1403 273000


Cutting, Grooving & Processing Alucobond by Scott & Sargeant Woodworking Machinery.

GMC - 170 AUTOMATIC VERTICAL PANEL SAW WITH ELECTRONIC PROGRAMMER FOR VERTICAL & HORIZONTAL CUTS WITH AUTOMATIC 90° SAWING-UNIT ROTATION.

The mod. GMC 170 ELECTRONIC SYSTEM vertical panel saw is the only (vertical) unit of its kind in the world featuring an electronic programmer capable of performing sequence cuts and executing the entered work program order in a totally reliable, precise and speedy manner.

Possibility of setting 90 programs, each of which may contain 18 different measures that can be repeated 99 times. Both absolute and incremental values may be inserted into the programmer, as well as saw-blade thickness, clearance recovery and length of cut to be carried out. Moreover, it is possible to adjust working speed, positioning and quick-return. It is possible to choose the cutting sequence: horizontal + vertical, or vertical + horizontal. For horizontal cuts, processing from up-downwards - or vice versa - may be chosen.
The panel saw can be connected by serial output to a P.C., from which it can receive data such as: cutting optimization, work program memory increase, display of cutting diagrams. The GMC 170 E.S. can solve any type of work problem and ensures practical, reliable and safe operation.

The GMC 170 ELECTRONIC SYSTEM makes it possible to work as follows: in the automatic mode, by setting the cutting values on the programmer display; in the semiautomatic mode, by manually positioning the sawing-head on the measure desired and manually carrying out measures and cuts. The continuous equivalent average acoustic radiation pressure 72,0 +/- 2 dBA (empty), 82,0 +/- 2 dBA (working).

Can be adapted for grooving and slotting alucobond panels

Features:
90 cutting programs stored, each containing up to 18 different measurements that
can be repeated up to 99 times.
Cutting start and stop at any point, whether vertical or horizontal.
90° rotation of saw-blade unit in automatic mode.
If the programmer is excluded, the panel saw can be used in automatic or manual
mode. The panel saw can be equipped with personal computers and software for
the optimation of the processing.

To mill and cut a standard 4599 x 1250 acm panel takes approximately 8 minutes with the "SCU" device fitted

Category:

Science & Technology

Tags:

• Machines4wood.com
• Cutting
• Grooving
• Processing
• Alucobond
• wallsaw
• vertical
• panel
• saw

[ertan16]

SUPER GOOD

[Phishboy26]

is this a dado machine?