My new HHO Drycell project #5 Reservoir First run

Here is the continuation on my 31 plate 6x6 4n6 drycell with 304ss 24ga..
Got my reservoir finished last night and ended up not having to work today ..so I got her wired up and running outside.


As far as I can tell so far just having the holes in the top is working out great..But as you all know I will know the real story when I get all my MMW data...

I am just showing it running my next video will have MMW and LPM..

Going to let her run about 4 or 5 hrs to help condition the plates...

Category:

Science & Technology

Tags:

• HHO
• hydrogen
• fuelcell
• mpg
• drycell
• free
• energy
• electrolyzer
• ebn

[SassySi3rra69]

What is it???

[jdcmusicman]

a hho (hydrogen/ oxygen) generator ...good for little torches and stuff

[superbee1970]

Musicman, GREAT results w/ the single hole unit! Where the vid of the 51 plater man! I wanna see that bad boy, and see it in ACTION!

I'm also about to create a no hole drycell, is super simple too, will post vid as soon as complete. Gaskets are simple as well. Bolts won't be going thru the active plates, just the end plates, same as you...

Also, can't trust the batt charger gauges, MUST use meter to measure V and A accurately.

Superbee

[jdcmusicman]

I broke the 51 plate one down back to 31 plates , but hope to do a video soon with 3 cells hooked in a series a 31 6x6,21 6x7 3/8,and a 6 13x7 plate cells..

going pop 120v and bout 15 amps to them , it will be just like having a 58 plate cell ...I am going to try it anyway just for fun

[rooster8214]

Hey Dude. Congrats. Very well done. You are very close to a very successful cell design. He's a hint, work on your spacing and the voltage per cell.

I have a dry cell design too, using only 13 plates that are 6" x 6". I'm yielding 3.5LPM, using 11.66V @ 44A and MMW of 6.82. This was confirmed by an independent lab to confirm my results. Like you I could not believe it. With the cell stack you should be able to achieve 4LPM+ when its all said and done. Trust me you can do it.

Keep the faith

[jdcmusicman]

Thanks , yeah I currently trying to design a no hole drycell..I have high hopes .Hope to have a prototype done very soon...

[bertulforc1]

Test your favorite HHO machine if effective or NOT. Park the car, start engine to normal temperature, run to 1500 rpm and hold it there by using tools or wedges. Turn ON your HHO machine. Check the RPM goes up to 1600 or more, it is GOOD. If RPM goes down or the same, your HHO machine is ineffective, useless, and waste of time, effort and money. Any seller will pass this test, BUY their HHO machine. (Forget the driving around wasting more gas, or read On Board Computer Instant MPG).

[elsenor285f]

my water turned grey.. what does this mean?

[superbee1970]

Rooster, what spacing are YOU using in your 6.82 mmw unit?  Thanks!