Part 3: Hefty Hoist Dump Kit Installation

This is part three of a three-part installation series of the Pierce 5T dump kit on a Chevy chassis. This video shows the complete installation of the Pierce dump kit. The whole process took two installers two days to complete.

This installation video can be used when installing a 7.5T or 10T kit. The main difference between each kit is the lift angle, overhang and length of the bed.

5 - 7.5T kits are compatible with 8' - 12' beds while 10T kits are compatible with 10'-16' beds. Read your manual for further instructions.

http://www.piercesales.com

Category:

Autos & Vehicles

Tags:

• dump kit installation
• install
• vehicle

[DustemHandyman]

why are you not reinforcing the cross members you cut?

[piercearrowinc]

@DustemHandyman The reinforcement is preinstalled on the crossmember and measures 2" x 3/4". View 1:30-1:35 to see the reinforcement on the crossmember. It's a quick clip but if you'd like me to send a better photo of that piece I'd be happy to. Since this kit is universally built you can add reinforcement you feel is necessary for your particular truck; however, when customers have had problems with sagging it is because they require a heavier kit like our 7.5T to 10T.

[piercearrowinc]

@1armbender Thank you so much! That's exactly why we started creating these videos. Let us know if there are other videos we can create that would be helpful for you. -- Tabitha

[1armbender]

great job! I have been looking at how to wire my dump motor this showes perfectly. It is an old instal and someone has messed with the wiring. than you. Looks like you guys really know your job.