vib on sport v3.wmv
Loading...
Loading...
874
views
Loading...
4:11
Esky Lama V3, Bad wobble after crash on first day :(by saltbearer17,009 views- 3:42
Blade 400 3D acrobatic flightby heyingosl2,002 views
- 1:51
Bill Krafthefer Tarot 450 Pro.aviby RaptorBill42926 views
- 5:46
1st flight with a Blade 400 rc helicopterby TobiasBucher949 views
- 3:01
E-flite Blade400 3d with the JR g370/ds3500g comboby 32323222957 views
- 5:26
tarot 450 sport v3by 323232226,237 views
- 1:47
Blade 400 - Crash - Attempt Rollby drurus713 views
- 5:32
key chain cam.wmvby 32323222264 views
- 3:15
EXI Le with sonix black motorby 32323222252 views
- 4:30
Blade 400 First Crashby maxmanak473,382 views
- 6:09
Blade 400 Flight and CRASH!!!by mikepmurf49,027 views
- 2:36
Trex 450 Sport First testby eltoffer6,717 views
- 4:43
T-rex 450 Sport Build 7 of 7 Tail wag in test flight fixed.wmvby MrSpeedy0112,760 views
- 4:35
Tarot 450 V3 Pro Sport.mp4by untas5,425 views
- 4:37
Fix Pitch RC Heli Blade Balance & Setup Tips Lama CX2 XRBby esstein42,597 views
- 4:30
E-Flite Blade 400 3Dby hobbyconcepts185,660 views
- 3:18
Eflite Blade 400 RC helicopterby wmcneal42345 views
- 3:22
Blade 400 3D FIRST FLIGHTby zpat26127 views
- 3:06
EXI v2 with Ake ice cold motorby 32323222139 views
- 4:16
E-flite Blade 400by 323232221,982 views
tarot would not stop the shakes.
i took everything off of it and tossed it in the trash.
32323222 1 year ago
forgot to mention in my last update,
the washout base was binding really bad with the guide pins from the head block, i drilled the holes in the washout base bigger. i believe this was the cause of the two servo failures, 9 batteries later its still flying great.
32323222 1 year ago
Another update,
the wobble is gone, i believe it was due to a blade grip that got smashed tighter on the blade than it was originally.
i also had a swashplate throwing metal, so i`ve replaced this as well.
so now after 6 batteries, i have a smooth flying heli again.
32323222 1 year ago
another update,
the cause of my wobble now? i have a two year old ace-rc 8117 servo going bad, i can see the servo arm jumping.
now this was not the original cause of the wobble, i had the corona ds-919mgs in when the wobble first apeared.
i am currently waiting on some more coronas to arrive so i can finish this project.
32323222 1 year ago
just an update, the only original part is the frame. i still have this wobble.
32323222 1 year ago