PS2 Slim Repair - Great Success
Uploader Comments (dankss)
All Comments (50)
-
@dankss Yesss soo when we find the fuse how do we change it ???? and where are these fuses located ????
-
i have a burnt chip on my motherboard where the motor to turn the discs goes do you know how to fix that :o please help
-
/watch?v=vV2GsxzsbmA
plss help mee
-
irrrrrrrrrrrrreperable
-
do you mean soldering??? whats sotering?
-
@dankss Where are these fuses located?
Thanks
-
so can the video out put be fix if it stop working an the slim ?
-
very good!
-
I have a problem with my AC jack for the PS2 slim for some odd reason the part that goes connected to the back of the PS2 (yellow piece) completely came off. can anyone help with this?
-
some games dont work and some of them work but it take too much time i cleaned the lens but then non of them worked ... what is the problem do you think it is ???? please help me
is it normal for the ps2 slim power supply to wiggle
macegx 9 months ago
@macegx
it happens from time to time. the jack is only held on by some solder points. over time of use the solder can become loose and cause it to not make the right connection to the board. especially from people popping that power plug in and out excessivley. if yours isnot getting power most likey thats the problem.
dankss 9 months ago
When I open my ps2, the sensor doesnt go back the whole way like usual, and when I try to play a game it makes an awful noise. Plz help me.
drewdude31 11 months ago
@drewdude31
sounds like you need to grease up the rods... if you dont have any grease try using wd40 on a napkin then wipe it on the rod..
dankss 11 months ago
Hi you seem like the person to talk to about this. I just bought a ps2 slim for $7 but it doesn't do anything. I pressed the button on it to turn from red to green but it turns back red less thatn a second later. Any idea what the problem is? I would really appreciate any help with this, thanks :)
pepsiturtle22 11 months ago
@pepsiturtle22
The problem is one of the fuses/resisters.You will need a digital meter. The fuses you need to test are: PS1, PS2, PS17, PS8, PS13, PS6, PS15, PS3, PS7, PS11, PS14, PS4, PS5 and power fuse F001. Set the meter on 20K, these resisters/fuses should read the same as if you touched the two leads of the meter together, the meter should go to 0 or 1. If the meter registers more than two or if you don`t get a reading at all than the fuse is blown. hope this helps
dankss 11 months ago