GURU-Z XEON FP

My first built FP Heli...2 months in this hobby and still learning to fly..Guru-Z Specs: 18A ESC, 3900KV brushless Motor, Carbon fiber Tail boom, Esky Digital Servo, Tail rotor kit from Erazor 450 heli, Kyosho M24 main Blade, Spektrum AR6200 receiver, Spektrum Dx6i transmitter, Align Trex 4510 Skid, 11.1 1300mah 20c lipo bat, Detrum Gy48v Gyro...

Category:

Sports

Tags:

• Guru
• Xeon
• FP

[chrisarena]

Nice. I just getting ready to order a Xeon / belt tail conversion Kit. Have you heard anything about the new Guru-Z CP 3mm CP head kit? I will build mine FP for now. As I would kind of like to see how a Belt tail FP with a good gyro feels after flying the padoodle out of my Honey Bee V2 FP. But it's kinda neat to know that I can upgrade the same heli to FP when I get bored with the FP head.

[hiki2502]

@chrisarena better use a Kyosho EP Caliper M24 Main Blade it will fly smooth.Yes i heard about the Guru-Z CP 3mm CP head kit but never install it yet. a belt driven tail is always a good choice for a FP heli it will save you a lot of money.. motor driven tail is a money pit.

[BluesGuitares]

Do not buy this chopper or any thing from Xheli, Nitroplanes, Nitrorcx, all the same company. Terrible company to do business with! Battery and charger are not goo. Expect 6 hour charge times and 5 min flights. Don't even scratch this thing or you'll void the warranty.

Update on my razor. After 3 wks the 3d switch snaped off with the switch, unexpectedly, in the 2 d mode. Total loss. I am going with a Trex 450 clone. Do not buy this bird or any from this company!!!!!!!

[hiki2502]

@BluesGuitares are you with me when i bought this heli KIT in hongkong? also what makes you think that Xheli is selling this kind of heli? this is a KIT which means that you have to assemble it and put your own electronics to make it flyable.

[hiki2502]

@BluesGuitares what makes you think that a fixed pitch heli is not for beginner?

[BluesGuitares]

@yeogav If you don't have one don't make assumptions. This bird is not for newbies and will not hold up well.

[yeogav]

got some 6 and 9 degree blades on order

[hiki2502]

@yeogav good to hear that your building a guru base FP.. i would recommend that you use a Kyosho EP Caliper M24 Main Blade ..

[yeogav]

@hiki2502 nice one! TREX500 very nice size heli and the lipos aren't too expensive. will be building my Guru Z soon for a garden/indoor event hack about.