Intake Mod
Loading...
Link to this comment:
Uploader Comments (indiextronic)
All Comments (20)
-
please tell me there is a hole somewhere in that area that leads outside.
-
That is *NOT* a FILTER, it is 12 times smaller in surface area than a paper element. So the holes are at least 12times bigger allowing huge bits of dirt in to your engine! This reduces performance and BHP. The paper filter & housing passes more CLEAN & COLD air than the engine uses at full RPM. You are a victim of very clever sales teams as they use key words that you want to hear. They sell to boyracers who can't afford a decent car. Go and learn about filtration and engines. K&N is junk!
.
-
@fucimports agreed
-
THE MORE BENDS YOU HAVE IN YOUR CAI THE LESS HORSE POWER YOU GET...
-
@tmorales509 ive got a cardomain
-
ok i did the same thing in my 89 maxima..actually got it from this vid..thanx.its the aem old air intake...i took apart the original intake box and it had a circular metal small tube inside of it..i drilled it out and reonnected it to the sensor and used the 4" adapter to put the intake on
0:29Nemesis Maxby NemesisAutoClubNYC9,704 views
- 0:2196 Maxima Short ram Intakeby tuckerbarrett15,157 views
- 0:48air intake maxima GXE 93by so1818181811,475 views
- 1:27Design Your Own Custom Cold Air Intakeby SpectrePerformance162,822 views
- 1:172002 Nissan Maxima - Intake Rev.by RazorTNK17,755 views
- 0:4207 Nissan Altima Fujita Intakeby importroller41,292 views
- 0:3295 Maxima Half and Half intakeby pntball994,486 views
- 0:274th gen maxima with vq35 (during seafoam)by tavarish18,228 views
- 1:2992 Nissan maximaby bayarde7189,726 views
- 4:2508 Camry intake modby ITHINKICANFLYNO19,885 views
- 9:18NWP Engineering 92 Maxima 3.5L Engine Swap Init...by Aaron92SE6,711 views
- 0:07Maxima drive by Injen Intakeby bigfo0tz10,030 views
- 1:441994 NISSAN MAXIMAby GlennToyotaScionKy8,697 views
- 0:15my home made cold air intakeby JLJERRYG99,036 views
- 1:362009 Nissan Maxima Takeda Air Intake Systemby aFePOWER6,750 views
- 1:01Corolla Short Ram Custom Intakeby 5litreV1023,377 views
- 0:512003 Maxima SE Open Headersby chiefsmokedawg18,509 views
- 3:23SFR Nissan Maxima turbo systemby SpeedForceRacing104,860 views
- 0:272009 Nissan Maxima Takeda Air Intake Systemby TakedaUSA7,888 views
is there anyway of making a cold air intake on this car? Or a Custom named brand intake tubing?
OZ31K 11 months ago
@OZ31K what you need is a 1993 Honda Accord Cold air intake kit and a generic 90 degree pipe off of ebay. The S-pipe that comes in the kit will replace the stock one coming from the throttle body, the 45 degree bend one will go from the MAF to the headlight (will be routed to the right of the battery below the fuse box), and the last 90 degree bend will go below the headlight into the fender where you will attach the filter. So really all you need is some extra couplers and an MAF adapter plate
indiextronic 11 months ago
dude this doesnt even sound the great srry to say this really didnt add th t much HP to your car at all and all those bends in the intake you lose alot of HP
tmakidd0703 1 year ago
@tmakidd0703 All I did to this intake was take off the airbox (and resonator), and replaced the box with an MAF adapter plate and conical style filter. I know the gains aren't great, if any, but it does allow the engine to rev quicker and breathe easier. This was a long time ago though and the car has since been modified by my cousin.
indiextronic 1 year ago