CRX D16z5 vs. CRX B16a1(black)

CRX D16z5 vs. CRX B16a1(black) partII

Category:

Autos & Vehicles

Tags:

• CRX
• D16z5
• vs.
• B16a1(black)
• partII

[bakkerm1986]

D16Z5 IS A DOHC!!! DOHC!!! DOHC!!! FUCKING NOOOBS!!!

[InfinetyX]

@srh420666 LOL So my D16Z5 Dohc aint a Dohc ? Wooow you know your facts o.o

ill just take out one camshaft just for you (Y)

[Therealnerdi]

D16Z5

(Basically the same engine as the D16A9, but now with a catalytic converter and lambda sensor) Found in: 1988–1992 Honda CRX (European Market) Displacement : 1,590 cc (97 cu in) Bore and Stroke : 75 × 90 mm (3.0 × 3.5 in) Compression : 9.5:1 Power : 124 PS (91 kW; 122 hp) at 6,800 rpm Torque : 14.3 kg·m (140 N·m; 103 lb·ft) at 5,600 rpm Valvetrain : DOHC, four valves per cylinder Cam Gear : 34 tooth Fuel Control : OBD-0 PGM-FI Head Code : P7 Piston Code : PM7 ECU Code: PM7

[Therealnerdi]

D16Z5 (Basically the same engine as the D16A9, but now with a catalytic converter and lambda sensor) Found in: 1988-1992 Honda CRX (European Market) Displacement : 1,590 cc (97 cu in) Bore and Stroke : 75 × 90 mm (3.0 × 3.5 in) Compression : 9.5:1 Power : 124 hp (92.5 kW, 126 ps) @ 6800 rpm Torque : 103 ft·lbf (14.3 kg/m, 140 Nm) @ 5600 rpm Valvetrain : DOHC (4 valves per cylinder) Cam Gear : 34 tooth Fuel Control : OBD-0 PGM-FI Head Code : P7 Piston Code : PM7 ECU Code: PM7

[TeeWeeQcKsteel]

@rruuder jeah jeah jeahhh! :-) Word!

[AzNPryDe2o6]

@bakkerm1986 i know but i prefer sohc boost! =]

[bakkerm1986]

@rx7turbo287 Theer is also a big difference in weight. The D16z5 CRX is about 900kg. The B16a1 CRX is 1010 kg. More than 100k'g's so that makes a lot of difference too!!!

[bakkerm1986]

@AzNPryDe2o6 They are both dohc's.... Sohc's are slow...

[AzNPryDe2o6]

SOHC ftw! =]

[rafaelislife5]

are all u retards dohc and sohc not doch or soch dual/single over head cam not dual/single over cam head wft??? makes no sense

[rruuder]

D16z5 is almost the same as d16a9.

d16z5 is low emission version. it has catalytic converter. i removed it from mine. d16z5 can be real pain in the butt for many cars.

its none-vtec. just pure doch

[69T3VOLKZ]

@srh420666 HEY WHAT D16 VTEC U GOT.???? I GOT THE D16Z6.....SOCH BUT I NEED ME A B16

[69T3VOLKZ]

@srh420666 YOU WRONG MAN, D16Z5 ITS A DOCH JUST LIKE THE ZC ENGINE THE D16Z6 ITS A SOCH MOST D SERIES ARE SINGLE CAM WITH AN EXCEPTION OF THIS ONES D16A1, D16A3, D16A8, D16A9 and D16Z5 AND THE ZC

[oli13a]

@srh420666 type in d16z5 into google images and you will see where your wrong.

[srh420666]

ok 1 d16 is sohc they come vtec and non vtec i have a d16 vtec in my 92 civic ex ur thinking abuot the b16 thats vtec and non vtec b16s are dohc the d16 isnt dohc only sohc

[kamikazicrxsi]

do not underestimate the power of si!may be they dont have v-tec but they run as well nice if they tuned right!v-tec has the advantge in tunning because can produce much more torgue and hp from the endless aftermarket parts......

[yugotec010]

powerdhonda@ d16z5 is DOHC-no v-tec,actually org. the weakest DOHC in Europe,A good D-serie Dohc must be faster in first 3 gears than a b16a1,he's got that 100 kg less weight,excp...about the gearbox,it's diffrend than the SI gearbox-D16Z5 gearbox is much shorter,so he give the B-series good competition..

ps-DOHC-doktor

[poweredbyhonda89]

was that the sohc vtec zc? or dohc non-vtec zc?

[rx7turbo287]

unless the b16a lost compression, there's no way, the d16z will beat it., d16z5 peak at 130@6800.(7200 redline) and b16a1 159@7600. (8200 redline) and engine weight is not much different. and tranny the zc use si tranny or any d series tranny and b16a use Y1/S1/J1 (could be gsr or ls) which gear ration are closer then zc. and should get out the hole faster. but i didn't hear the vtec, both engine sound the same, just curious what its done on zc.

[lechucrx]

czerwone musi byc szybsze:D hmmmm chyba czarny spalił start:P

[joaoronaldo]

hey ... what you have in the d16z5 ?

[staminaaa]

16i16 sempre bom arranke

[qpa002]

czerwone szybszejsze xD