Crysis dedicated server codes

Server Settings
Help Displays most important commands that are needed to
start a dedicated server
sv_bandwidth [50000] (Default: 50000)
Bit rate on server
sv_bind [0.0.0.0] Bind server to a specific address.
sv_cheatprotection [3] (Default: 3)
Enables Crysis Wars internal cheat protection.
sv_DedicatedCPUPercent [0] (Default: 0)
Sets the target CPU usage when running as a dedicated
server, or disable this feature if it's zero.
Usage: sv_DedicatedCPUPercent [0..100]
sv_DedicatedMaxRate [50] (Default: 50)
Sets the maximum update rate when running as a
dedicated server.
Usage: sv_DedicatedMaxRate [5..500]
sv_gamerules [gamerules] (Default: Singleplayer)
InstantAction or PowerStruggle
sv_gs_report [1] (Default: 1)
Enables Gamespy server reporting. Necessary for NAT
negotiation.
sv_lanonly 0 (Default: 0)
Set 1 for a LAN server.
sv_map [mapname] The map the server should load.
sv_maxplayers [maxplayers] (Default: 32)
Number of max players on the server
sv_maxspectators [maxspec] (Default: 32)
Number of max spectators on a server
sv_packetrate [30] (Default: 30)
Packet rate on server.
sv_password [password] Server password.
sv_port [64100] (Default: 64100)
Bind server to a specific port.
sv_say Broadcasting a message to all clients
sv_servername [name] Name for the server that is used ingame. If no name is
set machine name will be used instead.
sv_timeofdayenable [0] (Default: 0)
Enables time of day.
sv_timeofdaylength [1] (Default: 1)
Sets time of day changing speed.
sv_timeofdaystart [12] (Default: 12)
Sets time of day start time.
sv_voting_cooldown [180] (Default: 180)
Time in which the player will be able to initiate another
vote after starting previous one.
sv_voting_ratio [0.51] (Default: 0.51)
Fraction of player votes needed for successful vote.
sv_voting_team_ratio [0.61] (Default: 0.61)
Fraction of initiators team member votes needed for
successful vote (only for PS).
sv_voting_timeout [60] (Default: 60)
Voting timeout in seconds.

Gameplay Settings
g_c4_limit [1] (Default: 1)
Max C4 a player can place (recycled above this value)
g_fgl_limit [2] (Default: 2)
Max FGL remote grenades a player can launch
(recycled above this value)
g_friendlyfireratio [1] (Default: 1)
Sets friendly damage ratio. [0] will disable friendly fire.
g_fraglead [1] (Default: 1)
Number of frags a player has to be ahead of other
players once g_fraglimit is reached.
g_fraglimit [0] (Default: 0 = infinite)
Number of required frags before a round ends.
g_minplayerlimit [0] (Default: 0)
Minimum number of players before game starts. For
Instant Action only.
g_minteamlimit (1) (Default:1)
Minimum number of players in each team to start a
match. For Power Struggle and TeamInstantAction only.
g_nextlevel Switches to next level of the map list (levelrotation.xml)
g_MPDeathCam [1] (Default: 1)
Shows the killers location.
g_revivetime [20] (Default: 20)
Revive time.
g_roundrestarttime [30] (Default: 30)
Time until round starts after minimum people join
g_scorelead [1] (Default: 1)
Score a team has to be ahead of other team once
g_scorelimit is reached. For TeamInstantAction only.
g_spawnprotectiontime [2] (Default: 2)
Number of seconds of invulnerability after a respawn.
g_spectate_TeamOnly [0] (Default: 0)
If set to 1 (true) it allows to spectate your team mates
only.
g_suicidedelay [2] (Default: 2)
Delay in seconds before executing kill command.
g_tk_punish [1] (Default: 1)
Allows team kill punishment.
g_tk_punish_limit [10] (Default: 10)
Number of team kills a user will be banned for.
g_teamlock [2] (Default: 2)
Number of players one team needs to have over the
other to not allow joining this team anymore.
i_restrictitems List of items to restrict for this MP round.
Common Commands
Ban [playername] Bans player for [ban_timeout] minutes from server.
ban_remove [playername] Removes player from ban list.
ban_status Shows currently banned players.
ban_timeout Ban timeout in minutes.
Kick [playername] Kicks player from the server.
Kickid [playerid] Kicks player via ID from the server.
Status Shows current status of server.
g_suitspeedmultmultiplayer=any #
g_suitspeedenergyconsumptionmultiplayer=0
cl_strengthscale=any #

Category:

Education

Tags:

• Crysis
• dedicated
• server
• codes

[crysisxld]

lol the song is called wake me up inside, and thanks for the commands that you posted =) i never knew there was a command for income

[crysisxld]

Check the description on the right of the video and it will show you all the codes you will ever need....And at the very bottom of the description are the codes i used in the video.

[crysisxld]

Lol well you cant join other servers with devmode unless the server is running on devmode =D

[rany615]

@RobinA0 do sv_say welcome!

[n2cry]

I lost this Youtube account long ago and cant get it back XD

[MultiRezso]

@crysisxld You what writee at 1:27

??

[MeongMeongMeow]

@niksrathod66 Is it firewalled? Have you try asking another people to open console (~) and type : connect [your-ip]

If another people can join the server, it might be your firewall stopping broadcast on the port which is used for connecting to Gamespy or Gamespy has blocked your server or they have got some error.

If another people can't join the server, it may have stopped working, but also can be your firewall. Check your firewall before trying again. Try to disable your firewall at all.

[MeongMeongMeow]

@Play671

<-

After adding to archive, you have the ZIP file. You should upload it to anywhere to get it working so all players can download the map.

You should have a Hosting Account.

After you uploaded the zip file, you should : map_netdownloadurl [url] in your server.

--EDIT on the First post-

...PS folder. After it, you just Right click "the multiplayer folder" then Add to Archive. (You should...

[MeongMeongMeow]

@Play671 It's a bit complexed things. First, you can't just copy your .cry file. You need to copy the map folder. Then you need to File > Export to Terrain Texture then save. After that, i think you should edit the XML file in your level folder.

||

For Power Struggle, create a folder named Multiplayer. Second, inside that folder, create a folder named PS. Third, Insert your map folder inside the PS folder. After it, you just Right click then Add to Archive. (You should be choosing ZIP)

||

->

[MeongMeongMeow]

@broullon1 Easily block port 29910 (Use any tool to block it)

[MeongMeongMeow]

@RohitJ456 not in CMD. It's the dedi svr app. just kick "playername"

[giovanny309]

well i dont know i made my server and i runns perfecto i got a consle command whene your in server go to server consle command and type sv_say theme what Ever you want you can get moré consle commands by typeing how to make a crysis wars dedicated server under the discription it tells you some consle commands

[niksrathod66]

when i make my own server

it gets disappeared frm d server list after 5 mins

so no one noes my server is still running

any solutions for dis??

[Play671]

I am very worried please help me. I edited the map "M. ESA, " when exporting to the game to put you in multiplayer the name I had put on my map that is 2 M. ESA does not appear in multyplayer if I want to make him a dedicaded server. I made​a copy of the statement not to spoil the real, I called him M. ESA 2 but when exporting to the game it does not appear to play in multiplayer, what should I do to export maps made​by me in multiplayer? please help