Hydrogen Tap B29 (Flame)
Loading...
Uploader Comments (johnaarons)
All Comments (22)
-
looks to me that the insulation broke down on the main contact to the plate there, the O from the water provided the environment for flame perhaps. the insulation layer on that wires looks degraded somehow. If theO level came up enough to allow combustion then maybe the heat, electrolyte and any metalic coverings have broken down and sublimated into the water hence gritty and balck (oxidised) either way, looks like you got an O spike in the cell.
-
You might have unwittingly started a controlled fusion reaction - some sort of cavitation reaction.
-
Check for conductivity in your insulator.
i did a similar experiment and i discovered the rubber hose insulator, i was using actually conducted (with great resistance) electricity. (i think it is the fillers they use in rubber manufacturing, that are the problem.
-
cold fusion ? lol
-
Here is a theory, if there was no electric short, or something.
The cell produces H2 gas in bubbles on the inner plate, the electricity between the mesh and the plate, separate H2, into H + H, or monoatomic hydrogen.
The single Hydrogen bubbles recombine under water, forming back into H2 with the bubble collapsing to half its volume, creating great localized heat, but no actual flame or spark, at the surface.
But i wonder what the black stuff is?
-
Remember this story from '95?
They were using sound waves, but perhaps the Aaron cell is doing something similar?
"The star in a jar effortlessly reaches temperatures of tens of thousands of degrees, which is hotter than the surface of the Sun."
news. bbc. co. uk/2/hi/science/nature/4270297
. stm -
The fire happened below the water line the bubbles were the fuel/oxygen they consumed themselves and went out rather than spreading no nitrogen present to expand to allow the bubbles to expand or spread to the other bubbles. Basically you had a bunch of small fires rather than having "a fire". Had it happened above the water line you would of had a big boom.
-
my thoughts are this. The water mixed with hho turned the water into a slow burning fuel. What I am thinking is this water injected through a mister into the intake along with hho would make the system burn at a slower rate. Similar to KANZAS machine where ultra sonics turned salt water into a burnable solution
4:22
HHO / Hydrogen Generator Dry Cell Micro Torch Build Statusby jdcproducts3,269 views- 2:46
Hydrogen Tap B28 (Found Answer)by johnaarons603 views
- 9:23
Hydrogen Tap (Focus- 100 miles) 325by johnaarons39,613 views
- 8:48
Hydrogen Tap 1 Series 3(Plates In Plastic Tube) #34by johnaarons5,906 views
- 2:46
Daniel Cell Replica - Reactor HHO - 1by danielgpalacios504 views
- 3:55
Hydrogen Tap B21by johnaarons628 views
- 7:15
HHO KITS FOR TOYOTA COROLLA AND TERRANO V065 052011by vox1philippines788 views
- 3:02
Hydrogen Tap B25 (First Step Test)by johnaarons394 views
- 7:47
Hydrogen Tap 1 Series 2(Water Problem Gone "why") #21by johnaarons10,743 views
- 6:58
Hydrogen Tap(Electricity Through Magnetic Field ) 100by johnaarons64,571 views
- 7:15
Hydrogen Tap (AAron's Cell & Honda) 131by johnaarons3,055 views
- 4:22
Hydrogen Tap B18 (HHO Now )by johnaarons607 views
- 2:26
Hydrogen Tap B27 (Test Blow OUT)by johnaarons456 views
- 1:47
HHO BATTERY FLAME TORCH TWIN BUBBLERby ballscrewpro1,247 views
- 7:20
Hydrogen Tap ( Zero Field using 9v AC 800 ma) 101by johnaarons22,201 views
- 2:34
hydrogen generator finally proven pt.1by capetide24,953 views
- 2:20
Huge HHO Flameby hydrofuelincanada307 views
- 5:03
Hydrogen Tap 1 Series 2(Completed Series 2 ) #24by johnaarons7,853 views
- 9:45
Magnetic Field during HHO production?by cjpeaceful121,023 views
Don't over think this dude you simply had an arc that was igniting the bubbles that encountered the arc. Basic troubleshooting check your connections looking at what I can see of the cell the spade clip might be getting a bit close to the outer screen. I'm sure you had the cell secured in the center so it didn't fall over on top of your terminal. Also galvanized metal is zinc plated if the screens have been used a bit you might be breaking down the plating releasing it into your electrolyte.
sonorace 9 months ago
The interesting part here (to me) is that if ( a big if) the flame was from "Hydrogen" than the system should have gone up in one "big bang"... but it didn't.. ( I am still here). ... instead ... a under water flame...
John AArons
johnaarons 9 months ago
hmmm its hard to tell what ingited the hydrogen since I couldnt see through the sparks from your wires.
That black water is h2o with an extra quark, hence the blackness.
flahr1 9 months ago
The "blackness" is from the ash (not part of the reaction of the plates).. I believe we have to take that out of the question...
John AArons
johnaarons 9 months ago
John, This is not rocket science. You simply can't use those materials in ANY HHO device without this happening. Those gaskets are eroding making black water. You know better than this.
Larry
HHOPWR 9 months ago
There is a misunderstanding here...(your).
The problem here is a "flame".. and as of yet I can not find out where or why.. or how.
Rocket is not the problem here... and if the "inference" here is that I am getting stupid.. I do not believe that is the case..(could be... but I think not).
John AArons
johnaarons 9 months ago