installation of solar water heater

installation

Category:

Science & Technology

Tags:

• solar
• water
• heater
• installstaion

[321ozzy]

First of all thank you for the video.

I would like to give some advice:

Use teflon tape where necessary as Thieoni1 mentioned.

What's more, you should always polish the surface of the tubes with sanding paper before connecting them.

Another point of improvement is tightening the joints well; they seemed to be rather loose, which will lead to leaks.

[haokangcrystal]

Thank you for your advice, this video just want to make our client know how to install it , if something else more, it will seems difficult to the clients, and when they know how to install it , they can install it as per their demand, we just show the structure.

[321ozzy]

And thanks to you for replying so fast and taking the advice positively.

For following videos I would choose to leave out music (no music); most people who watch the video are non-native speakers of English and will face difficulties understanding the spoken word.

Good luck.

[haokangcrystal]

Dear , Thank you very much for your attention to our company, and we are very pleasure to talk about the video. You see, we just do business with our client on net, and the main language is English

[haokangcrystal]

in order to teach our client to know how to install it , we use video and voice to teach them , both can increase the understand of the installation. So the main user of the video is our client who knows english, so it works. Anyway, thank you for your suggestion

[Weston1968]

Bla bla bla! I totally agree with you. They may as well got the Swedish Chef of the Muppet show to demonstrate this, as I would have probably understood it better.

[kyoclone02]

what's the name of the valve you're installing during 1.24 - 1.30? was it a pressure relief valve?

[MB031]

The air vent should be on the right side of the collector on the side of the temp. sensor socket which is hot outlet.In case of drain and service there has to be vacuum braker and in case of overheat press. and temp. relieve valve..This collector will deliver extreme temps. and is great for cold climates as well as warm.Great plumbing music and nice set up.

[notoriouslizw]

Excellant solar plumbing music!

[faadad]

Would you please tell me the cost of this system

[jerramy]

Dont the copper pipes need to be insulated so as not to lose the heat?

[catatonicable]

Its made/invented for colder climates, maybe its too efficient.

[catatonicable]

How much is this system, and can you to send to South Africa.

[sbrust1]

nice;)

[jeunefred]

For the tubes, what I usually recommend my buyers is to install the plastic ring at the bottom first, then slide the tube into the plastic ring far enough that the other end of the tube is past the manifold. Then don't just slide in the evacuated tube right in, But instead, pull the copper tip out and fit it first, then slide the evacuated tube. This way, you are sure that you get a full contact with the tip of the tube and the manifold.

Then simply screw the plastic cap in

[Weston1968]

Did you understand the Swedish Chef better?

Cut & Paste:

Muppet Show - Swedish Chef - making donut