Farécla G6 Rapid Compounding Tutorial

As with any new pad, knead the new G6 Rapid Dry Use Compounding Foam between your
fingers to soften it before first use. This will significantly help to improve its performance.

For best results always prime a new G6 Rapid Compounding Foam with
compound prior to use. A little further kneading may also help the pad to bed in.

Centre the G6 Rapid Compounding Foam onto the G6 Rapid Backing Plate and press it down firmly.

Apply the G6 Rapid Advanced Dry Use Compound onto the foam or surface of the panel sparingly and spread the compound over the surface.

Too much product is unnecessary, a little goes a long way. Using too much product will lengthen the process and hinder performance.

Rest the polisher on the panel with the mop held at a slight angle.

This will also help to keep the panel cool during compounding by letting air pass over the panel.

Start the polisher and work evenly over the flatted area. It is better to start slowly and increase the speed gradually.

Farécla Compounds contain no fillers and thus the surface defects will be permanently removed. Compound the surface until all marks have been removed.

Using the G6 Rapid Dry Use Compounding Foam, buff the surface in a controlled overlapping motion until all flatting marks have been removed.

Towards the end of the process, use the foam flat on the surface to help prevent swirl marks.

Continue compounding until the desired finish is achieved.

Finally, wipe carefully with a Farécla Finishing Cloth.

Category:

Autos & Vehicles

Tags:

• G6
• rapid
• dry
• use
• compounding
• foam
• compound
• buff
• finish
• farecla
• automotive
• ART
• polish
• scratch
• removal
• scratches
• car
• defect
• defects
• buffing
• buffer
• machine
• polishing
• trade
• bodyshop
• professional
• repair
• paint
• paintwork
• shine
• shiny
• surface
• world-class
• world
• class
• 3M
• diminishing
• abrasive