95 Cobra with 331 Stroker/Trickflow Stage 2
Loading...
Top Comments
All Comments (10)
-
what heads are you running?
-
I think we all work with a limited budget. When I bought my 91 many years ago it had a TFS1 already in it also. Even with new springs, correct install height and correct pushrods I could not get the valvetrain to stabilize at anything above 5000rpm. My dyno graph showed it and I knew the cam cores were weak after that. What a lot of people don't understand is that a weak cam core will distroy your engine.
Even Ford new back in 1987 to use billet core cams for the 5.0 stock.
-
@fidstang The Mustang I bought has a TFS1 cam and #24 injectors already on it as well as TFS TW street heads and a TFS street burner intake. I work with a very limited automotive budget hence my asking as to save money. I have since decided to save my money up and swap out the cam and port the heads. May do the injectors and intake as well.
-
Ditch the TFS junk cams. The core suck on all of them. Why would you spend all of that money on a stroker to put in a cheap cam. If you can't figure out what you need for a cam, pay some one who knows what they're doing to design or pick one for you.
-
@iWouldBoneSamusAran fag
-
Nice car. What compression ratio are you running?? Do you think a 331 is to big of a motor for a TFS1 cam or 24# injectors??
-
Nice car. What kinda 331 did u put in it, was it built from the original or did u buy it? The reason is I'm looking to put 331 in my 94 Gt just trying to find a good builder cause I've heard DDS is s!@t now.
-
Sweet ride
-
nice car LOSER!
0:50
5.0 with B303 camby MYLNORE27,736 views- 0:17
1994 Mustang GT Trickflow Stage 3 cam Idleby 5ohSugarFree15,735 views
- 1:40
95 Cobra 331 Trickflow stage 2 cam idleby wmorris1322,665 views
- 0:35
2001 Cobra 5.0 Liter Stroker Stage 2 Cams at Idleby 2001silvercobra7,451 views
- 2:23
89 mustang trick flow stage 2 cam idle-stock exhaustby husker917,794 views
- 0:43
'83 GT with a Built 351W at idle and pulling awayby Sweet83GT53,417 views
- 1:26
1989 Mustang Trick Flow Cam Idleby 0XYM0R0N2916,070 views
- 0:36
1993 SVT Lightning - First run with the new comboby madramper4,048 views
- 2:17
Mustang 5.0 Exhaust - Novi 1000, GT40P, TFS Stage 1, Flowmasterby dan50XLT18,968 views
- 1:39
94 GT Mustang 331 with Borla ProXS Exhaust Idle REVby Sick94gt5,319 views
- 0:38
DSS 331 Stroker Break-inby bssplyr4life2,283 views
- 2:53
1993 Mustang GT Supercharged 331 Stroker R-Block with 3" MAC Prochamber and Catbackby kbremmer52,130 views
- 0:59
Mustang 331 strokerby 1990mrstang7,490 views
- 0:43
Sick mustang after heads / cam swapby spoolx20,777 views
- 2:49
1995 Mustang Cobraby 95supersnake45,170 views
- 0:29
fast shift mustang 5.0by The4444554416,337 views
- 0:59
95 Cobra Kenne Bell exhaust clips of Borla-Flowmaster- Magnaflowby buonobunch5,980 views
- 0:52
331 stroker stang on dyno getting tunedby rodeheavers5,286 views
- 0:57
1992 MUSTANG 331 STROKER DRAG RACE 1.59 60ft 11 5@117 PULING THE TIRES OFF THE GROUNDby luvmy90p112,449 views
@iWouldBoneSamusAran nice comment FAG!
triplet85 2 years ago 3