Diamond Tool Holder
Loading...
Loading...
4,012
Loading...
Uploader Comments (ProjectsInMetal)
see all
All Comments (5)
-
I have used this type tool holder atleast 8 years. I purchased it from the folks at village press. You can actually cut towards the tailstock with some learnings.
Loading...
4:06
1.3 Machine Tool Basics -- Lathe Cutting Tools -- SMITHY GRANITE 3-in-1by SmithyCo116,353 views- 9:42
Gear Makingby vk2erg27,742 views
- 2:10
Tangential Tool Holder in Myfordby dave20thmay3,870 views
- 4:15
Part 5-5 Harbor Freight Carbide Tool Grinder Review and Modificationsby ghostses10,370 views
- 2:00
Turning & the Latheby e1m1s448,914 views
- 2:38
Using the sharpening block with my toolsby SegmentedTurner1,426 views
- 0:21
Motorized Linear Sliderby Excitron38,986 views
- 5:12
Rotary Broach Tool Holder Set-Up Videoby peter08tool22,175 views
- 8:19
Myford ML7 Digital Readout Installationby AllendaleStores7,566 views
- 3:22
Installing a DuMore Grinder on a latheby dukestudentshop4,402 views
- 6:10
Diamond Tool Holder in useby Diamondtoolholder32,412 views
- 2:09
MILLING DVD From Chronos - Mini Machines 101 Vol. 3: Precision Drilling, Reaming & Tappingby ChronosLtd3,422 views
- 7:48
Making Extended Wheel Nuts for Shovel, Axe and Jack Holderby chrisjh7771,333 views
- 3:08
3/4 square bar in mini latheby antopia14,614 views
- 0:31
Dynafile - Grinding Corner Weldby DynabradeInc4,737 views
- 1:55
Stroboscope: Grinderby DaveTheYellowDart11,713 views
- 0:48
How to Use a Fly Cutter with the Micro-Mark MicroLux Mini Milling Machineby micromarktools124,692 views
- 3:08
Crash Course in Milling: Chapter 1 - Basic Machine Anatomy, by Glacern Machine Toolsby GlacernMachineTools166,232 views
- 2:11
Cindy Drozda - Sharpening the Hooked Box Scraper for Woodturningby cindydrozda2,575 views
- 0:57
Studer S21 Universal CNC Cylindrical Grinding Machine with StuderFORM High Speedby AdvancedGrinding2,941 views
Hello, Could you post a heavy roughing cut in some gnarley steel and also with some tougher stock (4140)? DOC as far as you can?
J800613 2 months ago
@J800613 I don't have any 4140 or anything else that's tuff or gummy to work with. I avoid difficult materials. I also have a smaller hobby lathe with a 1hp motor. So a 0.050 cut is pushing the limits on my machine, but not the limits of the tool. So even if I had more difficult to machine material I couldn't really take a more aggressive cut without bogging down my lathe. There should be other videos online that show a heavier cut. If not, write to the manufacturer. They might have more info.
ProjectsInMetal 2 months ago
Very nice holder. Thanks for sharing...
daywalker627 1 year ago
@daywalker627 Thanks! I've been really happy with it. Once you use one you'll use it 10 times more often than a conventional cantilever style tool holder.
ProjectsInMetal 1 year ago