How To Install Replace Power Mirror Nissan Altima 98-01 1AAuto.com

http://www.1aauto.com/1A/Mirrors/Nissan/Altima/1AMRP00149
1A Auto shows you how to repair, install, fix, change or replace a broken, smashed, cracked, or shattered rear side view mirror. This video is applicable to 1998-2001 Nissan Altima models. This repair can be performed in about 10 minutes and only requires a 10mm socket, driver and extension.

Category:

Autos & Vehicles

Tags:

• how
• to
• howto
• replace
• fix
• install
• repair
• remove
• put
• on
• take
• off
• broken
• smashed
• cracked
• shattered
• rear
• side
• view
• outside
• mirror
• nissan
• power
• 1998
• 1999
• 2000
• 2001
• 2002
• 2003
• 2004
• 2005
• 2006
• 98
• 99
• 00
• 01
• 02
• 03
• 04
• 05
• 06
• installation
• instruction
• tutorial
• video
• 1AMRP00149
• 1AMRE00315
• 1AMRE00316
• 955-433
• 955-434
• 96302-9E016
• 96301-9E016

[carazycutiekim]

Does this video help for my Nissan Altima 2009 model? I would really really appreciate it if you get back to me in regards of this :) Thank you!

[1aauto]

@carazycutiekim The basics should be the same, such as you would more than likely need to remove the door panel, to remove the side view mirror.

[filmkid20]

Quick question what if you want to change the actual mirror inside how can you take it with a new piece of glass

[1aauto]

@filmkid20 Usually on the backside of the glass there's either tape, a ball or these little fingers that kind of hold them in place. We have the mirror glass available to us for the Nissan Altima. If you would like a price on it just reply and I'll send you the price. Hope this helps.

[RGB7005]

how does this method differ from a 93 altima?

[1aauto]

@RGB7005 We currently do not have an auto repair video on this particular vehicle. However the basic steps needed to remove the side view mirror on your 93 should be very similar. Hope this helps you out.

[pjh0636]

This was really helpfull thank u

[angelofdawn11]

thank you so much for the video! you helped a student save some money.

[1aauto]

@dgr89cof You would need to remove any of the trim bezels with screws that hold the door panel on, and then remove the door panel with a putty knife or door panel removal tool. On the backside of the door panel there are plastic push pins that fasten the door panel to the door of the car. Hope this helps.

[dgr89cof]

hi, what about removing the door panel driver side on a nissan sentra 06 1.8? Some tryd to break into my car the other night and they puchd a hole under the key hole on driver side so im planing on covering up that hold but need to take off the door panel.