Scion TC led swap

leds: PLCC2 3.5mm x 2.8mm

If changing to blue, white, or green leds you also need one 471 (labeled R157 on the circuit board) and five 331 (labeled R151, R152, R153, R154, R155) resistors. I am NOT sure what happens if you mix blues and reds together, but the same power that will power a blue will blow out a red. Removing these resistors is easier if you use desoldering braid to remove as much solder as you can. Resistors have no polarity.

Finished dash: http://i72.photobucket.com/albums/i163/Krisimpossible/IMG_2995.jpg

Category:

Howto & Style

Tags:

• scion
• tc
• led
• swap
• mod
• change

[PIETR81]

nice vid, im about to changed the leds too but i dont have the resistors only the le, there is any big difference? i heard it will only make it brighter, whats ur opinion?

[krisimpossible]

i don't know for sure, but i wouldn't do it because the leds might just burn out

[JStevenG6]

@frankie815 ghostwriter - rjd2

[cj599]

@krisimpossible why would they burn out ? their as good or better leds

[13catrachos]

hello i whant to know wear you get the resistor and were you get the led

[BASA208]

how could you tell which leds are for the numbers and the lines on your gauge? numbers being the speed your going and lines that surrounds the numbers.

[polofosho09]

How did u test the LEDs? What was the watts of ur solder gun? Thanks

[devizzle88]

How was de-soldering the LCD on the HVAC? I'm about to do that and I'm kinda worried because I read a lot of people have trouble.

[CosmicJelly]

I'm buying LEDs from mouser.com (suggested on the SL post), what operating current and voltage LEDs do I need? There's one that's at 20mA, and one at 10mA.

[anndy337]

thx love the video and yes you do need to chang the resistors did you did that ??

[frankie815]

whats the song?

[hitmanurboss91]

where can i get these led's and what voltage do they also need to be