Measuring Energy From the Vacuum
Loading...
Link to this comment:
Uploader Comments (NRGFromTheVacuum)
All Comments (9)
-
Awesome Video!! I tried this out myself and could not get more than 12V in the caps at first however I changed out my coil for a standard AC trasformer(in series) and it
WORKED PERFECT!!
12VDC In
70VDC Out
I was only using 200V Caps 540uF but the results are still undeniable.
Please post more info about this phenomenon !! Good Job !
-
Hello! Your video is great! Unfortunately, i tried it today and didn't get anything on the second cap. The only difference in my scheme was that the second cap was 350uF and 450V and the coil had 3.5Om active resistance, 250mH inductance on a E-type ferrite core with 1MHz limiting frequency. Do you use bifilar coil or a standard single-directional coil? And how do you connect the bifilar output? Thank you in advance.
-
I do get to see the blue and the yellow and blue spark bedini talks about , blue is what we want .....konzen seems to get the circuit going the mechanical way thing is I can't find a dang reed switch in radio shack ......conspiracy ! conspiracy! haaaaa!!
-
Nice work and nice video! Seems to me that putting the pulses under some kind of variable analog or computer control would show just what this circuit could really do.
Where do you get these ideas?
-
I am doing similar experment watch?v=XMnzKTAX6CA and watch?v=vj33KbkDJ80 on my channel a.s.a.p subtite in english You have a GREAT instument set!! I apologise for my worst English I create pulse through spark high-voltage Congratulations to you Alessio
-
so the energy density has to do with the electric field density inside the capacitor?
-
Were the 2 x 10 uF caps in the second part
of the video in series or in parallel ?
It would be wise to document this all exactly in detail in your description.
Many thanks again.
13:27DIY SOLAR TUBES EVACUATED VACUUM TUBE SOLAR HOT...by GREENPOWERSCIENCE100,779 views
Featured Video- 10:00Part 1/7 - Zero Point Energy Extraction From Qu...by totallyfreeenergy5,381 views
- 7:37Free energy in minutes step by stepby kojsza2,836,716 views
- 2:24"Energy from the Vacuum" Documentary Series -Tr...by AJCraddock155,570 views
- 2:15Solar Evacuated Tube Vacuum Tubes DIY Test in t...by GREENPOWERSCIENCE140,288 views
- 3:08Bedini wheelby EletrikRide15,885 views
- 14:54Quantenphysik - Was wir noch nicht wissen - Exi...by GreenDevilAngel43,448 views
- 1:02Self Charging Battery Circuit (ED GRAY)by NRGFromTheVacuum15,297 views
- 9:49Tesla Radiant Energyby Palsness66,467 views
- 1:05Single Wire Radiant Tesla Power Transmissionby janne80824,345 views
- 3:06Magnet Motor Magnet Capture Energy Testby FORCETHETRUTH29,372 views
- 0:54Energy from the Vacuum - Russia -Scienceby ruzlanz1,793 views
- 6:19Tesla "Hairpin" Circuit Replicationby AEVector6,431 views
- 54:59A Machine To Die For The Quest For Free Energyby SowhatNC70,760 views
- 2:41motionless electricity generationby breakthemachine32,762 views
- 0:59MythBusters - Viewer Challengeby DiscoveryNetworks1,437,129 views
- 2:49"Energy from the Vacuum" Trailer - Pt. 10by AJCraddock34,386 views
- 0:37Solar Evacuated Tube Collector--Super Energy E...by Solarevacuatedtube27,538 views
- 4:20EV GRAY Pulse Motor (Experiment #1)by magdude197924,242 views
- 10:00Part 2/7 - Zero Point Energy Extraction From Qu...by totallyfreeenergy2,540 views
Can you please let us know the amp spike amplitude from the scopes ?
Did you measure the amp spike via a shunt ?
What maximum amplitude did it have in amps ?
Was it around 2 amps maximum at for how long about? Was it more than 10 milliseconds ?
Many thanks.
overunitydotcom 2 years ago
I only measured input current, since that's the only part of the circuit using conventional electricity. The second spike at the end of the video shows the current curve right before the vacuum inputs energy.
I do believe it was 1.0 Amp for 1/10th of a second. I don't have the results with me I will post them when I get out of work.
NRGFromTheVacuum 2 years ago