Over Unity 19

This shows the new test coil in use. I will build the rest of the test coils and test them with different types of magnetic wire. Last I will wire the machine and prove it is better than anything out there now.

Category:

Science & Technology

Tags:

• Over
• Unity
• 19

[lfalecorel]

nice!

[Ebdan88]

Very, Very nice job weldone.... :-)

[TheUFOeffect]

earlier in a video you were wondering whether to use thicker magnet wire for amps or thinner magnet wire with more turns to get more volts. I'd suggest go for amps. get thicker magnet wire. if you get high amps and low volts thats ok because volts are easy to step up and make more volts.

[MrJetjoe]

I am a 30 year machinist and free engery maker and you don't have to make anything costom to make a free engery gen. use the rating on the moter to your addvantage!!!!

[gogiser]

I was thinking of resonant oscillations ... not harmonic sorry for that!

[gogiser]

Very interesting concept! How is motion transferred from one to another pair? If you are counting on harmonic oscillations then maybe you are up to something! If not, then maybe you should have speed regulator for electric motor and while measuring current its pulling it should be expected to have drop when you reach harmonic oscillations! As for better generator making better then 95-98% of today generators efficiency will probably hit overunity!

Regards

[sirlepto]

Imagine, boron glass instead of PVC. Highly pulverized graphite instead of any other lubricant. So you have very little friction and any heat will not distort the wire core. Latter, when finished and operational might be better to encase it and consider some filtered air cooling if there is still to much friction (hope not).

[braidmeister]

@ 2:00 you said, "I got this piece of PCP"...I think you meant PVC, but not sure. Maybe this is your secret ingredient ;)

[Blueskyh2o]

Maybe a larger toroidal coil as the pick-up coil, just wondering... nice work!!!!!

[electrondon]

hey drift. looks good but you may have to scrap the second piviot. the coil will not collect as many electrons if it is in motion in the same direction of the magnet. in this case it looks like very little loss but i think you will have a problem with the coil wires moving back and forth and breaking or rubbing. the first piviot has a small energy loss as well. the very best thing would be a solid arm like you had in the beginning with a curved pvc coil tube so both parts will never touch.