MegaBender

Ercolina tube bending machine "MegaBender " is bending.

get more information at
www.hepeka.com

Category:

Science & Technology

Tags:

• Hepeka
• Giętarki
• giętarka
• Ercolina
• Biegemaschine
• masyzna
• do
• gięcia

[paulogeronimoqueiroz]

how can find supplier of this machine , I,m in Brazil

[68pishta68]

its as accurate as the die. How could it not be parallel, its wrapping around a common axis with both ends supported. offset can be done by moving the brass slide up and down, but not much.

[Duckyistrippin]

@codalisa007 its as accurate as the operator makes it.

[radioactivepenguin23]

@codalisa007 we have one of these machines at the shop i work at. it really is nice to work with if you have your deflection angle set on a test piece before bending work pieces. doesn't nessarily have to be parallel with the leg, at the controll you input your bend angle and deflection angle and push a button. awesome machine to use

[junekentucky]

@codalisa007  I don't think they were going for 180 degrees.

[codalisa007]

Didn't look very accurate to me. I noticed he never checked the tube to see if it was parallel with the other leg (i.e. 180 degrees)

[michaelovitch]

Do you send the music too ?

[blueange1s]

SHEESH THIS MUST COST A PRETTY PENNY OR 2

[MAS5270]

overpriced machinery. mine has a 7" grinder mounted underneath for the prime mover! the end of the armature shaft snapped off one day and ercolina wanted 700+ bucks just for a armature! I fixed it myself.

to:boganindustries. do about 50-60 bends with S/S tubing or pipe and see what happens to your illustrious brass block.

[boganindustries]

@MAS5270 Yeh look at all the brass coming off sheesh