Foam Profile Plane 1
Loading...
Loading...
4,858
Loading...
Link to this comment:
Share to:
Uploader Comments (frico00)
see all
All Comments (8)
-
hey i made mine outa rubber banda plastic and fiber glass
-
Do you think its possible for me to get away with using a 'double-layer' of foam instead? What wingspan is your model? Do you think I'll be able to get performance using a 8Amp ESC?
-
strip the paper off the foamcore and it's up to 40% lighter! It's cheap depron!
-
I have tried a few different combos with this plane and have found that you really need to keep the wingloading low to get good performace out of it. I think thats true for any flat plate wing style. I use a 15 amp motor, and a 1200mah lipo. My auw is 15 ozs and the plane does 3D VERY well. Good luck!
Bob
-
Good stuff.
Loading...
- 10:04
How to build a RC plane for $10 (part 1)by THExxxTINMAN456,721 views
- 0:56
HOW NOT TO: build your home made foam plane...by klinb8,252 views
- 1:59
rc plane with gas engine katana 70by buderparkflyers2,084 views
- 9:37
Eagle EPP Foam Plane at ASEANAby ellioncham5,733 views
- 1:06
EPP Foam SloYak28 Remote control 3D airplane Build Tipsby shadowwwalker8,000 views
- 9:59
How to Build a Great Homemade RC Airplane Really Cheapby spear913778,533 views
- 2:41
best home-made remote controled plane EVERby ninjamonkey272712,852 views
- 4:10
DIY RC plane 3D Mini gent profile II.wmvby as35mm2,857 views
- 1:56
Seagull Edge 540 46 sizeby frico006,333 views
- 0:06
とばしにきました。by asahi21c47,147 views
- 4:02
Make your own rc airplaneby claudiolag387,446 views
- 9:20
FPV (First Person View) Flight Camera Home Built Radio Control Beginner Plane 5by daveyedgar3,245 views
- 3:41
Indoor Foamie 3Dby olliewest3,154 views
- 2:33
twin engine rubber band powered airplaneby MPHWORLD661,309 views
- 3:08
Hell Cat Profile Foamie RC Plane Maidenby CaptGroovy412 views
- 3:07
Flying the Waterdog Nasty 31-10-09by jewfish68300 views
- 0:37
slofly 28" attacked from the dog O_oby simoottantuno305 views
- 8:57
Making a Foamie in SketchupPart1by kram24222,039 views
- 2:07
Scratch Built RC Foam Airplane with Pontoonsby PhunkyChikin7,364 views
What did you use to strenghten the wings? I bought some foam core material today. How would I strenghten the overal structure of the fuselage?
Rhydon1024 3 years ago
Carbon fiber accross the leading edge of the wing (rectangular) and along the botton edge of the fuse as well as carbon fiber tubing through the middle of the fusalage .
frico00 3 years ago
This plane is the "Nasty" designed by WaterDog over at RCGroups. I've made a few of them and they are amazing 3D machines when built light. Depron is by far the best material to use, along with a 150+ watt motor. Nice colors on this one.
Bobbydog69 4 years ago
Yes, it is a "Nasty" and WaterDog deserves all the credit. This one is a bit on the heavy side but I have since replaced the existing motor with a 500-600 speed motor and the results are quite good. I am by no means an expert flyer but I have let a few people who are try it out and they all seem to like it "especially the price". Do you have any other plans/suggestions for future projects?
frico00 4 years ago
what kind of foam did you use nice job by the way
duckk66 4 years ago
Thanks. This was made with Elmers Foam board from Staples. You can get it in other colors besides white. Make sure your plane has plenty of power since it is kind of heavy stuff. You can get the plans from the web.
frico00 4 years ago