Sky Surfer Banana Hobby with FY20A Gyro & Flaps
Loading...
Loading...
0:56
Bixler modby blue911orca2,017 views- 0:44
Sky Surfer with aileron and elevator Gyrosby MrTonynono765 views
- 5:07
Best of FPV Flying, The best moments of a 2 year FPV flying career !!!by amazingvideodepot31,119 views
- 8:18
Sky Surfer Battery Placement and Flightby trublu2nu4,549 views
- 4:40
Banana Hobby/ BlitzRC SkySurfer - Jim's Maiden Flightby Budkeywest8,457 views
- 4:12
FY-20A testby Vertoletov2,542 views
- 1:48
Gaui 330X-S + FY20A + 25mph Windby CementRoots595 views
- 4:53
FY20A install Part 2by ricmaverick83529 views
- 1:19
Tony crashes his Sky Surferby adamp1917292 views
- 3:52
Sky Surfer with Light Kitby trublu2nu4,121 views
- 1:39
Scotty's Sky Surferby gjferg452 views
- 3:25
Sky Surfer RC Planeby thoffmanjr99120 views
- 5:03
Banana Hobby Buyer Beware! R/C junk jet!by wingnut8a9,853 views
- 2:35
Ziv Bitton - Testing the FY20A stabilization unit from Feiyu tech.by zivbit5,822 views
- 5:30
FY20A install Part1by ricmaverick83411 views
- 2:05
★★RC-PARACOPTER-SKY SURFER-BRUSHLESS★★by diegobobcat18,526 views
- 5:39
Sky Surfer in Beautiful Sun Setby b6s4shelter289 views
- 8:39
Sky Surfer and Bixler RC Plane Build Supplement Part4by mmerry29,169 views
- 2:59
Skysurfer -- just landings with flaps and spoileronsby qfdforme505 views
@youronlycow Yo back at you, We used the BEC because we have a gyro. extra 2 servos are not a big deal. Still, a BEC is good insurance, not expensive and easy to install. thanks for watching.
b6s4shelter 4 months ago
Yo man, can I use a 30AESC with 2A5V BEC built in to power extra 2 servos for flaps? Or get a UBEC?
youronlycow 4 months ago
@TorontoR we run the ubec of the balancing plug on the same battery. you definitely could run it off a 500mah battery, We built a lead from 3s balance plug to the ubec and that works. sky surfer is rock steady in 20+mph winds. with that many servos and gyro i would definitely run a ubec. i look forward to the videos! H
b6s4shelter 5 months ago
thanks and awesome video by the way, looks like its flying as straight as an arrow! Appreciate the suggestion, I will order a 6A BEC for it since I have 6 of the same servos on the Sky Surfer (two are for pan and tilt for FPV camera). Are you powering it through another battery?
TorontoR 5 months ago
@TorontoR Hi, Thanks for watching. The FY-20A is unstable at low voltage. We run HXT 900 servos that are power hungry. The 2 combined result in brown out conditions and random behavior that have caused crashes. Ever since a UBEC has been used, the Gyros have worked flauwlessly. I would recommend it fully especially in 4ch planes. Also definitely use the vibration tray that comes with the FY-20A.
b6s4shelter 5 months ago
is the bec necessary? Just setting mine up, but not sure if I should just leave it to the BESC
TorontoR 5 months ago