470WHP with FP RED on 93OCT
Loading...
6,509
Loading...
Uploader Comments (Carnage376)
see all
All Comments (9)
-
The only reason my injectors are so big is cause I'm planning on upgrading my turbo.
-
Wrong, so wrong. You usually don't want to see over 80% idc.
-
very nice numbers man, but i need to point out that those 1200cc injectors are way too big. Any setup needs to work with around 95% injector loads- this is where the injectors load very efficiently- this is where the fuel molecules are the tiniest making the explosion the best. For that kind of power u got I would say that around 800cc would be appropriate.
-
Im looking for the same numbers on pump with a hx40!
Good stuff!
-
Once again sorry for taking so long to reply I just got my computer back. Let me know what you want to do and I'll help you out.
Loading...
Arent you afraid of running the car at 30PSI on pump gas? One bad batch of gas and you're done
TeamXPR 3 years ago
As far as getting bad gas I dont worry about that. I only go to one place to get gas.
Carnage376 2 years ago
I got a 6 seepd evo 9(in turkey we get only 6 spd) would the 6 spd be safe with same set up as you? or similiar hp levels
markmorrow8o 2 years ago
6 Speed Tranny's are weak. It will hold the power for a little while but the tranny will fail on you sooner or later with this much power. Get your tranny built or get a shep trans like I did. Good luck.
Carnage376 2 years ago
Yeah, what else you've got in there? Help an Evo brother out!
houdini178 3 years ago
Sorry I took so long to reply. You welcome to look under my hood if thats any help for you. Its a fully built 2.0
Carnage376 2 years ago