Rc Car Steering/Servo Problem

Steering issue with the GV Rhino Help is needed - may be a servo problem

Category:

Autos & Vehicles

Tags:

• RC
• GV Rhino
• steering
• Problem
• Servo
• electronics

[Phouenix77]

Can any one invent a better servos, Rc servos suck, specially redcat racing. This is y people have problems with servos that have every thing in them are small.

[rhinomonster1]

@Phouenix77 m8 i'm going to gt some power hd servos..check them out they're supposedly very good

[rhinomonster1]

I just too the servo apart It was the gears that weren't meshing together fixed that and it was perfect

[Racer18crf]

The gears could be stripped or the motor burned out (inside the servo). You could get a new gear set or a whole new servo.

[MRTHEDARKONES]

if you still have not fixed the problem yet, i think that you might have dirt in the steering which you may think its tightly sealed and nothing can get in but it does so, take it apart clean it all and then you need to re-assemble,. note: if you use water to clean it leave it 24hours till you re-assemble.

[evilteddybeardotcom]

@TheMCooLKidS1 You need to adjust your steering trim, It think

[TheMCooLKidS1]

i have almost the same problem and im not sure if is the servo but when i steer right the wheels turn all the way an when i steer left they turn but a little and they get stuck and make a clicking sound but i just move them a little and they get unstuck does anyone know if its the servo or if its something else i would really like some help here thank.

[Lethal527]

I have a problem can anyone help, i have a hsp atomic and the case for the reciver before i start it to check if the electronics work The on and off button the wires connected to that have come off and i try putting back to the place it was but wont work! :(!

[demonshadowfication]

@Phouenix77 I know! My car won't turn even when it's rtr

[RCCARRUBBER]

you have probally striped the gears, takes metal ones for steeering.

[MrNath5150]

i have a simaler problemsometimes the stering works and some times it dos enot and when i try and use the control the cor is not responding unles i tell it to go fawerd then it creep slpwlt fawerds but will not revers or go in any other direction anyone no how to fix this problem?

[zworldwarfare]

one of your gears inside the servo, the teeth are broken off and its locked up, go online, get a metal gear servo so they wont break.

[360ayan]

I FOUND PUT THE PROMBLEM , buy new one ;)