son of fermentation chiller
Loading...
21,521
Loading...
Uploader Comments (brewyourown4life)
see all
All Comments (51)
-
you should also run and airlock tube through and outside of the chiller, will remove warm bubbles
-
@brewyourown4life Just use a piece of heavy wire like baler wire or mechanics with the clamps on the ends the width of the foam cuts like butter put one end on the foam on line use gloves wire will get red hot pull tight on line right thru 2 seconds done breaks on line only go one way pull off clamp to cool or get help off power
Loading...
Why do you use two ice chambers, instead of just one?
HansenKai 2 months ago
@HansenKai depends on the out side air temp. you may need to use several jugs of ice to get to the desired temp.
brewyourown4life 2 months ago
That foam cuts way better with a hot wire using a battery charger
MrMrtiki 4 months ago
@MrMrtiki sounds good any video of it in action?
brewyourown4life 3 months ago
what was your room temps to achieve 45f?
Archtronics 4 months ago
@Archtronics i believe it was around 68-70f
brewyourown4life 4 months ago