E-sky Honey bee king 3

Problem of E-sky Honey bee king 3. When the chopper goes straight up, so the helicopter will start to slide to the left.

Category:

Autos & Vehicles

Tags:

• Kopteri
• Chopper
• E-sky
• RC
• Radio-ohjaus

[Tuomashi1]

Sakkezzi, En mä tuota lennä. Serkun kopu. Ja muutenkin serkku ostaa lennokin ja kiskasee tuosta servot siihen lennokkiin....

[matthew198411]

@igetcha69 thanks mate, i will try it as soon as ibuy some blades

[igetcha69]

@matthew198411

hi mate,

if you are using the standard transmitter that comes with the honey bee king 3 then turn the CH5 dial down on the transmitter to reduce the giro amount.....that should stop the tail wobbling

cheers

scott

[matthew198411]

can someone help me with my problem? the tail is wobbling when its in the air,what could be?

[nighthawk0077]

its not a problem, its normal with this class of heli, remember this is not one of those department store toy helicopters that practically fly themselves :)

[DiEg0123]

it will always go left because of tail rotor is blowing that way.

[lordlapswans]

well a helicopter will alway's go to the left becouse of the rotation of the main rotor , once you are in the air its gone , if your helicopter in the air is still going to the left then trim your helicopter , butt that the heli whit takeoff goes to the left is normal , don't try to trim that out unless your heli is going to the left when you are in the air , and most important is to always check if your swachplate is level bevore takeoff

[sakkezzi]

Jos vaikka kokeilisit ottaa sen kunnolla ilmaan, etkä vaan ''rullailla'' :D

[mYfLASK]

This could have been me flying mine, keep practicing I can now hover for about 15 seconds, after about two hours practicing. Good luck.