HHO SWISS INOX 8AFTER ONE YEAR'S EXPERIENCE

New marine wire coil, square cell, doble spiral
12 volts battery, stainless steel 316 L marine wire 3 mm (1/8 of an inch) diameter 50 mm, lenghth 100mm
double spiral 3 mm 316 L stainles steel wire and 316 L container
square cell 304 L stainless steel 2 neutrals tubes.

As a conclusion I have to say that for the sake of HHO gas production, anything you do basically works!
You can reduce electrolite in the distilled water to lower the amp draw of the cell, you can add a PWM and some how you manage to have a workable cell that can fit your personal needs.

But if you are looking into a high efficiency cell, then there are the Stan Meyer cells with tubes and electronics, and the Lawton's replication of it.
There is the Joe Cell in shandy mode.
There is daddyo44907 with nice, efficient workable cells.
There is EBN Smart Scare Crow and Zero Fossil Fuel with a super cell
And a the top of the expectation list there is the BobBoyce 101 plates cell whit low amps and it has an alledged output of near 100Liters per minute.

Category:

Science & Technology

Tags:

• CELLS
• ELECTROLYSIS
• FREE
• ENERGY
• FUEL
• CELL
• CAR
• GAS
• HHO
• HOH
• HYDROGEN
• INOX
• SWISS
• WATER

[heartrobot351]

thank you sir for doing this, it really helps ,i been so eager to do this cool project since i have an old car and want to see the results in it, now just one question is marine wire the same as the cables or wire i find in bikes,you know for the brakes, or in cars the cables they use for shifting gears in the manual transmission, just wondering can i use that type of cable, thank you,

[ammanninox]

@heartrobot351 NO I think the cable you find in bikes probably is only plain steel and will rust in no time. It should be marine wire 316 L or as the old definition A4 Stainless Steel.

Good luck and good work and good results.

[ferbankai]

I did something like this .. but the wires began to heat up ..

current, I guess ... that happened to you?? I can recommend something?

thicker wires?

[ammanninox]

@ferbankai Flood the cell and keep the connections under water but as I said coils are basically heaters and therefore can get warm. If you make the attachments much thicker than the coil material that could help.

[cousio]

I just started to watch videos of how to get fuel out of water, you are doing a great job, please never give up, you are helping our planet, you mention in this video that you got the best results from the plate system, I saw a video about daniel dingle and his work, he used Honey Comb separators, maybe you could try honey comb plates? I don[t know its just an idea

by the way how much does a house cost around the area you show in your videos?

its such a nice place

[ammanninox]

I am continuing don't worry.

A house costs around 1 million$ upwards if you are lucky here and there you can find a cheap one for let say 800000$?!

[Raymax642]

Have you seen the work John Kanzius did on the radio wave machine which ignites salt water. I could use some help duplicating this technology to save a young cancer patient.

[Raymax642]

I think your work is fantastic!

[luxurita]

I just realised that someone else made a similar comment earlier. Apologies. Please continue your good search. Good luck and may you find success.

[luxurita]

I wish to register my admiration for your work and tireless inquiry into HHO efficiency production. Have you considered adding a resonance component to fractionate the hydrogen atoms? Bless you in your endeavours

[kr8head]

Thank you for showing your work and progress.

With the plate and tube designs I've seen it is common to use a neutral plate. Have you used a neutral coil in the coil design?

Thank you again!

[uknowatsit]

Look at the circuit diagram presented by TheGuru2You, titled ' Self Resonating Powering Circuit for HHO Cell ' this could be the Magic ingredient to help increase efficiency .

[uknowatsit]

Hello Inox , very inspiring video , not just for the technical presentation but for your obvious joy in sharing your humanity . What a great world it would be if there was more who found your spirit .

I have not experimented with HHO yet but from my reading , it might help you to concentrate on the electrical input aspect to improve gas production . Maybe the high voltage electric pulse circuit would increase efficiency .

[luaconspiracao]

You are a great teacher. Thank you very much.