dodge 24v sled pull

Test and Tune pull at Tuckahoe Steam and Gas

385' letting out of it and coasting to a stop. The popping and smoke at the end was just me pushing in the clutch at high rpms and pumping the throttle a little as the rpms come down, because Vp44 trucks are known to vapor lock the pump and stall when going from full throttle to nothing that fast.

Category:

Autos & Vehicles

Tags:

• dodge
• diesel
• cummins
• sled
• pull

[dahlia1925]

ram 1999 quad cab

nv4500

bf goodrich 305/65/17

axle ratio 3.52

Thierry

[maddawg0517]

do you have or plan of getting a dual disk clutch before you pull? if not be careful you dont burn up the clutch. But i would use 3rd gear with 4-lo, or 1st gear with 4-hi

[dahlia1925]

hello,super with no smoke!

just one question, i'll try to begin pull in summer in Belgium with my ram cummins 4x4 with 325hp at the rear wheels, can you say me witch gear must i put ? 1 in 4 hi or never use hi always in lo ?

thanks

[maddawg0517]

what year is the truck?

what transmission do you have?

what size tires are you using?

These things are all important to know for choosing a gear.

[fordcountryboy]

4 low?

[maddawg0517]

yea 4th gear 4 low

[motorheadism]

gotta love the 24 valve cummins

[1ofscb06]

can we get some weight in the sled next time

[dahlia1925]

the clutch is a Rhino Pac part 05092SR300 HD ceramic Button option? hope enough for pull 3 times per year ! it's my daily work flatbed truck stock engine with 50hp injectors nozzles boost builder, with BD boost elbow K&N filter direct exhaust without muffler Silverline stacks powerchip Granatelli 60hp or 100hp lift pump raptor 150gallons boost, fuel press, pyrometer gauges brake exhaust Thierry

[fordcountryboy]

You get good wheel speed with 4th then? I just got an 01 6speed. It won't have as many mods as yours but hope to have a few by pullin season