XBOX360 COD5 WaW Rapid Fire FREE BDH.HEX file (SpeedFreak) 10.5-sps

(FREE HEX FILE) Burn the following hex to a 12f683 and wire using Hazers 'Sleeper' Stealth diagram.

Also known as the 'SpeedFreak COD Mod' and sold by mod shops that found my hex file. Why pay $25 for a kit when you can get my hex for free?

THIS CODE ALSO WORKS WITHOUT THE CAPACITOR BUT MAY OCCASIONALLY GET CAUGHT BY THE PATCH DETECTION. IF YOU WANT TO ADD A CAPACITOR USE VALUE 0.1uF

*Code is written in C and I will not be releasing the source code. I will keep this code '2-mode' to avoid competing with code writers: ActLikeYouKnow, Hazer, Acidmods, etc. If you want 3+ modes then buy from them, they have contributed to the RF community.


Mode1 = COD4 Fast
Mode2 = COD5 10.5 shots!!!


(New Version 1.1) BDH.HEX & Wiring Instructions:
http://www.megaupload.com/?d=DZ2WCL1C
*I have made 'mode 2' flash 4 times in version 1.1. The original version flashed 2 times only.

**I may upload a new version in the future, since COD4 got patched on 3-Sep-09. Keep your eyes on this thread!!


UK supplier: 12F683 chips (from £1.10) and Kynar wire, etc. Flat rate postage £1.50
http://www.bitsbox.co.uk/

Build your own PIC12F683 programmer & WinPic800 Software:
http://www.megaupload.com/?d=LKHH38KR


In the video I was using 20-sps in COD4, I have since updated this to 33-sps and it works perfect.


Video Capture:
Hardware: EzCAP DC60+
Software: Arcsoft TotalMedia Extreme

Category:

Gaming

Tags:

• yt:stretch=16:9
• XBOX360
• COD5
• WaW
• rapid
• fire
• BDH.HEX
• EzCAP
• Easycap
• DC60+
• capture
• SpeedFreak
• NUCLEARMODZ
• bdavies1995
• SiiKxSKiiLLz
• cheesychuck123
• mrbondv2
• masters0772

[themij5]

Why do you fire all the time it realy pissed me of

[MikeLdn88]

@themij5 do watch the video then you CUNT!!!

[oxX360Xxo]

Hmmm.. Either you are just holding down the trigger or it just keeps firing? Which one is it, you stopped firing once then carried on after you spawned.

[MikeLdn88]

i was holding down the trigger throughout, this was to prove it doesn't get detected by the patch.

Many RF coders wrote a hex that got detected after the first or second clip.

[chscats]

can you put up a pic of your internal wiring in detail because i wired just like the diagram and it isn't working and i verified that my 12f683 pic is programed correctly so i don't know what's wrong. Maybe just tell me some common problems or something like that would be nice. Thank you.

[MikeLdn88]

i don't have any install pictures to show. you should check that you have the chip the correct way round, looking down at the chip in 'bug position' the top left is +ve.

check your solder points thoroughly. Lastly make sure you've used the correct points for power and ground, as a lot of people have used the incorrect points!

If you're using a matrix board then check you have the diode the correct way round.

[themij5]

@MikeLdn88 do watch ? epic fail

[Caolan321]

how do you add more modes??

Thanks

PS. Do you know how to add more modes to Hazers Burnmeup3?

Thanks

[explozmzz]

i tried this today but for some reason it fires continuously untill i pull the trigger

[MCBaron15]

all i can say is WOW! perfect mod i love it. i used to build mods for my freinds using 555 timers but this is a billion times better...absolutely flawless

[oxX360Xxo]

oh ok. Was just wondering. Seemed weird you kept firing all the time. =D.