Gearbox problems

I am haveing some trouble with my Ver.3 AK gearbox. I resently switched my CYMA gearbox shell with a Tokyo Marui geabox shell.

Category:

Entertainment

Tags:

• airsoft
• gearbox
• AK
• 47
• problems

[muellr1369]

the reason your cut off lever is wobbleing is that you have lost your spring, you can buy a new one- it comes in a kit called "gearbox spring set."

the reason why you probably have the low "rpm," or "rate of fire" could be because youve upgraded your spring to a more powerful one.

[muellr1369]

also, for your wiring problem, try to get someone who you know is skilled with saudering and wiring electrical shit in general to help you. make sure if you have bought a new tapet plate (the plastic piece that connects to the air nozzel that the gears move back) make sure it's the right one for a version 3 gearbox because my friend accidentally put a version 2 tapet plate in my version 3 geearbox and my trigge would like every time i pulled it back. hope this helped you.

[airsofthawaii]

It mostly stocked parts! Its the original tappet plate.

[airsofthawaii]

No, the spring is in there and its a stocked spring..

[Shhadow74]

Yeah dude dont keep shooting your gun it will strip the gears, and Chris is right your battery is probobly not powerful enough unless it has a 30 amp discharge, try to get a battery with a 30amp discharge.. but that will cost you a good like $40 atleast... also.. if you gonna plan on getting a bunch of upgrades just get a new gun dude seriously get a Echo1 and put those upgrades in it the gun will work a LOT better then it will on that AK47

[airsofthawaii]

I am getting a custom 9.6V 2000mah small type battery I designed to fit in my stock. I may be planing to get an Echo 1 M4A1 or and MP5 J.

[TheFatAssCat]

go fuck a squirrel

[cccplt]

i hate when ppl put TM parts in shitty guns

[Gucio212121]

batery :)

[crowdsurfers]

get a new battery and a smart charger the stock batteries are usually more trouble than they are worth

[herulf123]

yup i think your right

[milsimaustralia]

so'd ya fix it?

[koreywhitley]

your gears might be shimmed to tightly and your motor cant spin the gears

[koreywhitley]

one that motor isnt the best and two you need a new spring on the selector switch

[randomaznkenny]

actually once you get used to it they are easy

[njas6]

the brushes on the motor are worn down