Twister 3D Helicopter
Uploader Comments (mhoyle0121)
All Comments (18)
-
@Lexorfly just because you have a cp heli doesn't mean you can fly 3d...I stepped up from coaxials with a walkera UflyS...I couldn't even hover it, and then i bought a Trex450 and a Trex250 and i can now fly circuits with them...3D helis are much easier than FP helis...
-
Has anybody had any problems with the Twister starting up by itself... full throttle and no control from the radio? If so do you have any ideas or solutions?
-
Looking forward to getting this, learned by flying the T CP2, man was that a nervous little bugger ... so now it's time to ramp it up and learn 3D
-
congratulations nice flight, I am learning a fly the same way and I am succeeding almost
-
what does it mean by 3d?cos its 3d you cant have a 2d heli flying!...can you?
-
any 1 know what Body Shell that is?
-
check if you have moved the gyro switch from the stock position to the other one, be sure you have enough pitch to counter the movement, adjust moving the tail servo frwrd or bkward til the tail's close to perfect as posible then adjust with the trim on your TX, always when seting up, get as close as possible to stable mechalically frst (with the servo links) then adjust the trim. if you have any other question related with helis, just pm and i'll be happy to help, there is no stupid question
-
I have just started using my Twister 3D and do not understand what I should adjust to make the main rotor spin faster, it seems to spin very slowly and the tail rotor spins out of control, could you tell me what I can change on the settings to rectify the problem
why have a 3D heli and not fly 3D ?..
Lexorfly 1 year ago
@Lexorfly I do but only on the Sim, It's far cheaper in the long run, and anyway I am no young topgun anymore!
mhoyle0121 1 year ago