Fireworks on the farm...part 3 of 5

This was a small private display I helped my friend Scott with. Scott likes to use long length fuse to shoot his displays. He also demonstrates a technique called piggy backing shells. The firing system he is using is an older model stepper unit. On my channel you will see some of the setup and I believe he will post most of the display.
In this videos I will be using a pyrodirect.com product, fast yellow Visco. I will also demonstrate how to hang consumer spinning wheels, shell repair and a new electric match port that instead of going into Quick Match will go directly into Visco.
I will not be posting the entire display just portions of it. This is mostly a setup video. Due to the length of the fuse it did need reignited a few times because the three inch shells blew the Visco fuse out a couple of time because we had it right over the top of the mortars. When you use this long fuse technique you risk the fuse needed reignited and you also risk something going wrong and it continues to ignite things. I would not recommend it for a close proximity audience. So be sure you have plenty of clearance if you use the long fuse technique. You will find the video ending abruptly because I am not posting the display due to length.

Category:

Entertainment

Tags:

• Fireworks
• pyrotechnician
• wireless
• firing
• system
• backyard
• electric
• match
• quick
• squib
• salutes
• roman
• candle
• firecrackers
• pyrodirect
• pyrotechnics
• mortars

[littlepyro678]

where did u pick up your small remote system to fire individual shells.

[displayfireworks1]

Do a search of Wireless fireworks firing system. There are many out there

[MrCatrinus]

you sad 30''inch salute shells :P lol 

[joespro18]

ghetto! hahah used to pro setups lol.

[twistedmetal99]

lol i love ''what the hell was that, oh those were our salutes'' haha

[Salamu29]

FACK

[HandMadeFireworks]

If he was tying all those strips with his bare hands he would have to use gloves. I used over 1000 of them one day I was laying heat cables in the floor and I had one hell of a water blister for almost 2 weeks after. Hand tighten those without gloves is a big no go...

[TBucket5]

Can someone tell me where to get fusing tips? I use that EXACT yellow fuse, but if i zip tie it it always chokes out. If i tape it it burns out at the tape, what are you doing that i am not?

[holmes6969]

Those were "Shotgun" shells from Millers in Toledo,OH and piggybacked with the cheap ball shells from Kellners.

[firecrackerman187]

wat type shell were those at 026