motionless electric generator

this video is in continuation of my previous video of world's first operating motionless electric generator,
in response to my last video i have several question i have answered those questions as well as shown amperes, In this video the voltage coming from grid are 250 so when we get the dimmer to the lowest level the output was 49 volts so out put from the electro gen become 338 volts my device needs only 30 volts to reach to 220 volts each 1 volt increase means 10 volts in out put
at the input this time we have placed a 60 watt bulb which is representing the input power when the dimmer is low its out put is very dim and when we feed this low power to genie the output from genie become very high but this bulb remains very low showing a low input and high output
regarding calculation although is not as simple as that but its good for approximation
input to genie is 2.7 amps at 49.8 volts so its 49.8 * 2.7 = 134.46 watts
output from genie 1.33 amps at 338 volts so its 338 * 1.33 = 449.54
please see the video in the last video the third wire i have shown clearly
the new bulb added at input was required by one of the examiners of the product and this shows the input remain low when genie makes high output
you can email me at winsonali@yahoo.com
thankyou for watching this video
tesla is my mantor

Category:

People & Blogs

Tags:

• vorktex
• magnacoaster
• magnetic
• power
• free
• energy
• windmill
• solar
• panel
• over
• unity
• slow
• electric
• meter
• alternative
• green
• tesla
• bearden
• motionless
• electromangetic
• generator
• generation
• war
• of
• currents

[TheNewsJunky2009]

Your measurements of input and output do not include the Netgear 12V Adapter, isn't that the source of the gain??

[winsonali]

@TheNewsJunky2009

the net gear 12 volts are required for running the control circuit it consumes only 20 to 30 milliapms. so this is not the source.

[subhankarnandan09]

The government Cover-Up with regards to Free Energy Technology

Just go to Google and Search for: Top Magnetic Generator -- Click the First Result

The evidence will shock you - you'll see for yourself even

a Video from on someone that build magnetic generator

[rdallas81]

Hook a motor to it......it won't work....light bulbs require little amps to run....that power comes from somewhere....

[yeaalrightiamawake]

@suvigisawesome yes , yes Asians are VERY smart, but how do I do this at my home, where are the drawings, and construction details???

[suvigisawesome]

See, this is proves that Asians are smart.

LIKE ME

[Wayne71nl]

You are not being very clear on what you actually measure.

You say one is the input of the device and the other is the output.

Why not leave the input connected and just swap around the board from mains to the output of your device and then take measurements and do the calculations!

The way you do it is not considered any proof at all!

[gconol]

Just a box with light bulbs as far as I'm concerned. Show us the schematics .

[tarotbug]

Ok so i have a filament bulb, suppose this guy just rectifies it to DC then modulates it to a very high frequency at resonance, what would hapen ?