CRT S-Mini 80 Channel UK & EU AM/FM CB Radio

Just in at Rigsearch, a smashing little rig with all the usual 'multi norms'. I got this one from Roy down there at PJ Box in Cornwall. Check out Roy's e-bay shop NOCANDO.
Thanks for looking,

Category:

Science & Technology

Tags:

• Superstar
• President CB
• CB Radio
• Intek
• Midland CB

[26TM013]

done the power mod works no problem mine showing 8w

[simonthewizard]

Its an Anytone AT300 Chassis radio so has the lot inside. IF you need more mods let me know, maybe you need do the mod like on my Colonia Export Mod if you look. Makes like you say around 6w FM and same AM, more than that it makes a mess on AM with the scope

[26TM013]

can you use a DPDT switch to switch between the normal mode and export wiring through it with the white wire and black link?

[rpcomms1]

Enjoy mods!

[mikefkingstrutter]

@rpcomms1 nice 1 gona try that,thanks for posting youre findings

[rpcomms1]

export 25.615 to 28.305mhz*

rx very good flat across band

tx power flat across band

fm dev 2.1khz peak

am 85% mod

rf power bang on 1w,4w,8w*

[rpcomms1]

near mod transformer there a small white link,cut it.

to enable hi power ,press and hold ptt on mic and turn power on

display goes blank on switch on ,then Hp release mic ptt, then press and hold ptt in will select hi power,measured at 8watts carrier!

ok for fm,but am mod drops to 60% sound a bit quieter but ok.

cheks done on a stablock rf comms test set.

[rpcomms1]

Ah found band change on up channel arrow changes bands A,B,C,D etc

looks like rf power,needs a link cut to enable check on bench and test if correct.

[rpcomms1]

got mine today press hold ptt power on H display=hi press ptt breifly turns off press hold ptt goes to channels ready heres a new mod ; press & hold up & down buttons and power on keep holding until diplay is shown 88 release keys looks like engineering mode 1,2,40,f1,f2 on channels cut white wire\move black link inside set -export RU etc havnt figured out yet how to change bands yet a,b,c etc any help??

[rpcomms1]

any one know what export mod is on these sets?