alternative energy solar and wind
Uploader Comments (michael970)
All Comments (24)
-
I am a novice to solar generation and appreciate these videos. Good info. I keep reading that you should not discharge a battery completely. My inverter shuts off when the battery gets to 10.7v. How can more of the battery be used if the inverter shuts off at 10.7v. Appreciate any info. Thanks
-
Nice work! Check out HHO and Wood gas, if you already haven't ;)
-
I just started watching your videos about 2 weeks ago and have learned a lot and am very impressed with your setup. My question is: can multiple charge controllers charge the same battery bank? I am trying to decide if I need multiple small or one large charge controller. I am just getting started. I have a 120 watt panel at 10amp, 15 amp chg ctrl, 1200 watt inverter and 'one' 12 volt marine deep cycle battery with plans to expand as I learn more. Thanks and keep up the good work.
-
Thank u so much for sharing all the great things u are doing,You are very help full to people like myself trying to work out problems with my projects. A solar water heater is next 4 me.
-
thats prety cool that the ones you made start turning before th top one. and i like that gadjet you have the TED meter where you get that?
-
@michael970 But if you did produce enough power would they pay you?
-
Muddybuttmuddyfuckmuddyman - have you seen that guys ALTERNATOR rebuild..... DAMN I would not let that guy near my goat.
-
@michael970 That's what I thought you probably did. By the way, I went to Enphase inverters after watching that video comparing the enphase to the plug in chinese inverters. I went up from 400 watts to 700 watts with the enphase 215's. I also bought the Envoy to see how my panels compared . They are all almost exactly equal in wattage. Your video really helped make the decision. Thanks.
Hey dose your electric company pay you money for the electricity you put back on the grid?
makerj101 3 months ago
@makerj101 hey I don't produce enough power to be in the negative at the end of the month.I have 2 houses so we burn some power
michael970 3 months ago
How did you get the copper coil into the tank? Was there an access panel on it?
wiboater4 3 months ago
@wiboater4 I fed it through one of the regular pipe inlets.I made a big cork screw with the 3/8 line and fed it in an that allowed it to compress as it hi the bottom then I went in the bottom hole with a piece of all thread and screwed it into the end of the coil and pulled it out the hole.then came the tricky part for me anyhow making it air tight a few adapters and some solder waaa laaaa it works.TAKE CARE@wiboater4
michael970 3 months ago
Please make a video of your windmills when you need to do some maintenance. I would like to see in more detail the construction of your homemade units. Thanks for sharing your great setup.
wtam69 3 months ago
@wtam69 hey check out the videos from muddymuddyman he will show you everything in detail.I will get some video of mine also.
michael970 3 months ago