Epiphone valve junior easy mods part 1
Loading...
Uploader Comments (jak442)
All Comments (7)
-
Hey jak thanks for the great vid. One question, do you think it would be a good idea to install a 1/4" female jack instead of a manual switch? I want to try and use a foot switch with this. What do you think?
-
Hi,
how about putting a potentiometer instead of the switch...to get something like a presence pot?
Any risk to do so?
Rgds,
Eric
-
@jak442 tried it with several guitars now:
the hights are there! THANKS!
but the thing i dont get is: how can the signal be reduced in volume when i interrupt the jumper to a grounded capacity. this is what my logics says... i might be totally wrong since i ve never done anything with technical electrics - i dont even know how its called^^ (since im not an english native speaker).
but thanks anyays!
-
Great video! Good instructions and high quality video. I'm gonna try it.
-
nice, very good instructions; modded my EVJ myself
6:17
Epiphone valve junior easy mods part 2by jak4422,979 views- 9:58
A Valve Junior (DIY) amp Tweak (HOW TO PART 1)by patfurlan6,989 views
- 5:29
Epi vj Billy Gibbons toneby patfurlan9,535 views
- 2:37
EPIPHONE VALVE JUNIOR Demoby TheJRGuitars2,249 views
- 0:38
Plexi SE (Epiphone Valve Jr) Soundclipsby sloanstewart3,601 views
- 5:02
Epiphone Valve Junior: Drew Krag's Home Studio Workshop, Analog Editionby gearwire1,312 views
- 3:06
Epiphone Valve Junior modsby kaihakki13,036 views
- 2:18
BitMo Bruce - "the mod man" talks about some of his mod kitsby BitMoBruce12,611 views
- 3:02
Epiphone Valve Junior mods and simple blues soloby kaihakki4,343 views
- 1:53
1956 Fender Champby vintageguitarandamp4,941 views
- 5:58
Tone Secret - Epiphone Valve Juniorby Passenger9515,498 views
- 10:17
Epiphone Blues Custom 15W/Class A BC30by EpiphoneBC302,143 views
- 2:12
RAT Electronics Hotrod valve juniorby realdocloco26,970 views
- 7:26
BitMo Trio Modded Epiphone Valve Junior Part 3by fullwood133,419 views
- 2:22
Epiphone Valve Junior Crop Top Combo with Celestion Alnico Blueby howlingpuppy26,818 views
- 1:02
Epiphone Valve Junior, Mercury Magnetics Mod Iby timoconnor6461 views
- 1:55
Epiphone Valve Junior + Tele US Std (www.guitarrista.org)by canalguitarra17,234 views
- 1:34
Epiphone Valve JR modified to PTP 1950's Gibson GA-5 Les Paul JR.wmvby yukesjs1913 views
- 5:51
Epiphone Valve Junior And Matrix Amps: Mary Halvorson Talks About Room Effects On Ampsby gearwire1,532 views
- 4:09
Epiphone Valve JR with Watts Tube Audio "VOXY" Board and Les paul jr w/ Lindy Fralin P-90sby zacharybroyles4,092 views
Just did the jp1 mod, but surprisingly I kinda lost some signal instead of getting some gain. I get almost the same sound with the mod and the volume at 10 as i get without the mod and volume around 6 or 7.
How? Why? Any advice?
waarze1 4 months ago
@waarze1 It might be guitar. This jumper and corresponding resistor scrape higher frequency, cutting it should allow more to pass to the second pre-amp stage. If you're playing a "brighter" guitar like a Tele, etc. you might not notice the extra highs which could be overpowering the bottom end and making it "sound" quieter. I've found that I only use the mod at low volumes and others agree, w/other mods it sounds better loud with jumper in tact. Good luck and have fun.
jak442 4 months ago