ICY DOCK MB990SP-B EZ-FIT Dual 2.5" to 3.5" SATA & IDE SSD / Hard Drive Bracket

Product page: http://www.icydock.com/product/mb990sp-b.html

Introducing the Icy Dock MB990SP-B Dual 2.5 to 3.5 SATA and IDE Solid State and Hard Disk Drive Converter. This dual bay drive bracket allows you to use two SATA or IDE SSD and HDD in an internal 3.5 drive bay in most standard cases. Since most cases are not set up to use 2.5 form factor, the MB990SP-B allows you to make a huge upgrade to your system with very little effort.

The bracket will fit most types of cases. Out of the box it can be used in both tool-less and standard cases. The EZ Fit pins on the sides of the bracket fit into most standard mounting holes, and are also removable to use either your cases proprietary mounting brackets, or to use screws for a more secure fit.

The EZ FIT bracket is extremely lightweight and has an open air design for maximum air flow and cooling of the drives. Most standard 2.5 IDE or SATA drives can be used due to the open back design, allowing use of direct connections to the drive, also giving the user flexibility to mix and match drives.

How to use the MB990SP-B:

Simply insert the drive or drives into the front loading slots, close the latch, and it is now ready to be installed in the case. To install, compress the two tabs at the rear, and place in the drive bay. When the tabs are released, the included pins will pop into place into your cases mounting holes, and installation is complete. Some cases use their own drive trays or brackets, or one may want to use his or her own mounting screws. To install the bracket this way, unscrew the gold pins in the mounting hole locations, and the case trays or screws can now be installed.

Category:

Science & Technology

Tags:

• Intel SSD
• HDD converter
• 2.5 to 3.5
• SSD Bracket
• 2.5 Bracket
• ICY DOCK
• HDD enclosure
• gaming gear
• upgrade

[ICYDOCK]

This is not compatible with Mac Pro sled. For Mac Pro system, please use MB882SP-1S-1B, MB882SP-1S-2B or MB992IP-1S 2.5" to 3.5" converter.

Thank you,

TEAM ICY DOCK

[ICYDOCK]

Correction: MB982IP-1S

[hanshij]

This looks great. Can it be used in a HDD bay of a Mac Pro 1.1 ?

[umulius71]

Nice... :)

[lillen300]

this means you are able to double the capasity of drives XD like from 9 drives to 18 if the power supply would be able to do handle that

[TheGeorgeInVegas]

Very cool. But, it looks like the mounted 2.5" drives are recessed into the adapter. So it doesn't look like the mounted drive(s) would be able to slide into cable-less SATA backplanes.