HPI Trophy 3.5 Full engine breaking in
Loading...
Link to this comment:
Uploader Comments (jthornley12)
All Comments (50)
-
Hi!
In this video I could not see you priming the engine before every tank. You only primed it on the 1 and the 2 tank, and not on the 3 and the 4th. Aren't you supposed to prime the engine before every tank?
-
@jthornley12 Miht be worth trying as an experiment to test longevity of engine. Basically, on a brand new engine you alter the stock settings to just slightly rich (rather than very rich which is always stock). Pr-heat engine to 160F. Fire up and start running immediately on the ground. use mid range revs to get the engine up into the 200's. Do this on 3 minute cycles letting it cool each time until you have put in 40 mins of run time. Hey presto you're motor is broken in. Time to start tuning.
-
Hi m8 I've just bought this car and sounds silly but can work out how to get the aeriel to fit s the antena is to short to fit through the cut out at the back of the body any idea cheers ps. Good video
-
@deleteknop Only free to review
4:51
HPI Trophy 3.5 HSN Engine Tuningby jthornley122,461 views- 3:27
HPI Trophy 3.5 Maiden Jumpsby jthornley12940 views
- 4:27
HPI Trophy 3.5 First Start In Winter Tutorialby jthornley124,471 views
- 2:09
3 x HPI Trophy Truggy 4.6 modsby bigboydicky5,596 views
- 2:04
STARTING YOUR NITRO RC - STARTER BOX - TROUBLESHOOTING - HDby RCRacing886,745 views
- 1:13
Nitro Motor Montageby modell0bau0org70,774 views
- 2:35
AoWei Yama Back to Bashing Pt 1by jthornley128,048 views
- 1:38
Starting your 1/5 2 Stroke Gas RC Carby jthornley124,328 views
- 0:58
HPI Trophy Truggy 4.6 flat out on beach!!by lpenhale8724,803 views
- 0:37
Hpi trophy buggy 3.5by DAGGERRC2,031 views
- 1:16
Hpi Trophy Buggy 3.5 Speed Testby psjdstu33,066 views
- 4:20
Breaking in Nitro engines made easyby alishanmao99,451 views
- 5:17
HPI Trophy 3.5 2.4ghz Closer look under shell reviewby jthornley121,790 views
- 2:15
New Hot Bodies D8S - First Shot's [HD1080p]by RcRacingFlakkee9,654 views
- 2:31
rc powerboat 26cc with zenoah racing kitby rcpowerboats1,896 views
- 0:10
Maverick Strada DC Evo - RC Driftby GerGoo009839 views
- 2:44
Nitro engine Carb opening gap & idle screw demonstrationby jthornley124,025 views
- 1:51
HPI Trophy Truggy 4.6 QuickLook Videoby RCislife33,982 views
- 1:12
hpi tropy 3.5 startup.aviby vangsoe21,631 views
Have you ever tried the 'New School' method of break in?
Laceyktm 3 days ago
@Laceyktm Nops never tried it :) always used this one
jthornley12 3 days ago
Wouldn't it be "healthier" for the engine to drag out the break-in process for a few more tanks? I was reading a 6 tank guide, turned into 7 because I realised the first tank must be idle. But my NitroStar is running pretty well. Also, you should be able to start it with the throttle trim centered. If that doesn't happen, replace your glow plug with a Fox Manufacturing Hot Glow Plug. That's what I did, combined it with my new lock-in ignitor and starts very easily. Prime and start.
SUPERFORMIAN 1 month ago in playlist More videos from jthornley12
@SUPERFORMIAN A 6 tank guide will include the first tank being idle mate. My engine starts very easily. When you break in as many engines per month as I do you won't take half as much care with breaking them in :D
jthornley12 1 month ago
can you free get cars?
deleteknop 1 month ago
@deleteknop Only free to review
jthornley12 1 month ago