Logitech G940 Problem

I FIXED THIS PROBLEM. BUT IF YOU HAVE IT STILL WATCH THE VIDEO!!!Everything with this product is great except there is a problem on some systems with the G940 throttle. If you put the throttle on full as seen in this video, the throttle only goes up to about 96%. If the throttle is idle, the engines only go down to about 40%. Usually on full the throttle would be around 100%(DUH) and idle would be around 30%. Also the power levels are uneven. Logitech has yet to "see" this problem. It has been brought up on the logitech website forums but has not been solved. Send me a message to find out how I even got it to 90% because before the throttle wasn't even working!!! Thanks. Rate, comment and Sub.

Category:

Gaming

Tags:

• logitech
• g940
• problem
• throttle
• full
• idle
• website
• forums
• video
• fsx
• flight
• simulator
• microsoft
• 10
• sp1
• controller
• joystick
• rudder
• pedals
• control

[0ds01]

it doesnt work for me on fsx, i set Null zone to 0 and Sensitivity at the highest , but the throttle when in airplane it stays at 10% or something like that, i have g940 too, and so far don't like it so much it needs a lot of configuration before flying a sim

[3snowyman]

@0ds01 Don't worry about it staying at 10%. That's a normal idle percentage on aircraft. The only way you will get to 0% throttle is if you turn the engines off. As long as you can get to 100% throttle, you should be ok.

[jasper18OfpFreak]

HELP i lost my cd and i dont know what to do nou!!

HELP ik ben mijn cd verlooren en ik weet niet wat ik nu moet doen!!

[3snowyman]

@jasper18OfpFreak The CD for Logitech? I am not sure if it is needed to run the G940. I don't remember though.

[0ds01]

i have finally calibrated the throttle , when you install logitech g940 drivers, when the setup is finished and askes you to calibrate joystick and throttle , at the throttle calibration windows , hold both throttles with your hand at the 0 , make sure when clicking next , the throttle doesn't move up on the calibration window, next logitech throttle properties , click settings , Hysteresis... Left throttle i set it at 21 and Right Throttle at 21 , this worked for me great at FSX

[0ds01]

@jasper18OfpFreak

go to logitech and download drivers for your g940

[0ds01]

@3snowyman

i don't know i have tried a lot of things in fsx but i can not get it work properly , any time i taxi i have to hold both throttles with my hand at the end so my plane doesn't go any faster, thanks for the quick answer :)

[apoc505]

take off the dead zone and sensitivity to full

[McBlemmen]

did you fix it? lmao