Alert icon
We're changing our privacy policy. This stuff matters.  Learn more  Dismiss

AD-1 NASA Oblique Wing Research Aircraft

Loading...

Sign in or sign up now!
Alert icon
Upgrade to the latest Flash Player for improved playback performance. Upgrade now or more info.
119,759
Loading...
Alert icon
Sign in or sign up now!
Alert icon

Uploaded by on Jan 19, 2011

http://airboyd.tv

Courtesy: NASA Dryden Flight Research Center

The Ames-Dryden-1 (AD-1) aircraft was designed to investigate the concept of an oblique (pivoting) wing. The wing could be rotated on its center pivot, so that it could be set at its most efficient angle for the speed at which the aircraft was flying.

It was designed as a low-cost/low-speed research aircraft to test a pivot wing design. The AD-1 took off with its wing positioned at a right angle with the fuselage. Once in the air, the wing would rotate on its pivot point on the fuselage until it formed a 60 degree angle. The goal was to design a high-speed transport with low drag. The AD-1 made a total of 79 flights, but adverse handling at sharp sweep angles made the approach less attractive.

NASA Ames Research Center Aeronautical Engineer Robert T. Jones conceived the idea of an oblique wing. His wind tunnel studies at Ames (Moffett Field, CA) indicated that an oblique wing design on a supersonic transport might achieve twice the fuel economy of an aircraft with conventional wings. The oblique wing on the AD-1 pivoted about the fuselage, remaining perpendicular to it during slow flight and rotating to angles of up to 60 degrees as aircraft speed increased. Analytical and wind tunnel studies that Jones conducted at Ames indicated that a transport-sized oblique-wing aircraft flying at speeds of up to Mach 1.4 (1.4 times the speed of sound) would have substantially better aerodynamic performance than aircraft with conventional wings.

The AD-1 structure allowed the project to complete all of its technical objectives. The type of low-speed, low-cost vehicle, as expected, exhibited aeroelastic and pitch-roll-coupling effects that contributed to poor handling at sweep angles above 45 degrees. The fiberglass structure limited the wing stiffness that would have improved the handling qualities. Thus, after completion of the AD-1 project, there was still a need for a transonic oblique-wing research aircraft to assess the effects of compressibility, evaluate a more representative structure, and analyze flight performance at transonic speeds (those on either side of the speed of sound).

The aircraft was delivered to the Dryden Flight Research Center, Edwards, CA, in March 1979 and its first flight was on December 21, 1979. Piloting the aircraft on that flight, as well as on its last flight on August 7, 1982, was NASA Research Pilot Thomas C. McMurtry. The AD-1 flew a total of 79 times during the research program. The aircraft was constructed by the Ames Industrial Co., Bohemia, NY, under a $240,000 fixed-price contract. NASA specified the design based on a geometric configuration provided by the Boeing company. The Rutan Aircraft Factory, Mojave, CA, provided the detailed design and loads analysis for the vehicle.

The aircraft was 38.8 feet long and 6.75 feet high with a wing span of 32.3 feet, unswept. It was constructed of plastic reinforced with fiberglass and weighed 1,450 pounds,empty. The vehicle was powered by two small turbojet engines, each producing 220 pounds of thrust at sea level. Due to safety concerns, the aircraft was limited to speeds of 170 mph.

  • likes, 3 dislikes

Link to this comment:

Share to:

Top Comments

  • @RoboCorpse3000 plane wings don't go that way, my mom said so.

  • How odd that these fly like that,, it looks really odd. x.

see all

All Comments (34)

Sign In or Sign Up now to post a comment!
  • @kramert25 it used less fuel at supersonic speeds if its wings looked like it was hit with a sledgehammer for some reason

  • @dragonredx Blohm und Voss  BV P202

  • @gundrag000 well then it looks like a xwing

  • @kramert25 It reduces the air drag and lifting power to achieve higher speed by modifying the wing span. Larger wing span to easier take off and shorter wing span for quicker cruising.

  • esthetically very ugly, but engineering genial

  • @gundrag000 dude I was joking of course, I was mocking everybody else.

  • i dont get it, why is the wing moving? what effect does it have?

  • igotabettervideo!!!

  • cool but worthless lol

  • what if it has 2 or 3 or 4 Oblique Wings ? why only 1 Oblique wing ? all of your brains are too limited

Loading...

Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more