RCBS Case Prep Center upgrade
Loading...
Link to this comment:
Uploader Comments (blfd1)
All Comments (9)
-
Really liking that case length trimmer.....a must for high production gas gun brass.
-
@sw8741 When new, the RCBS debur & chamfer tools work as shown in the video. After a few thousand cases, they dull and require more pressure and time to do their job. I'd pay more for carbide tools. Professional grade would use replaceable carbide inserts, but any carbide cutter cutting brass at low speed like this would last a very long time. I'm surprised the RCBS high speed steel tools dull as quickly as they do.
-
I just got mine back from a machine shop yesterday and they make a holder and used a set screw and it does not wobble at all...... I made a video yesterday of what it looks like. I really like it !!!!!!!!!
-
Dude,
How did you attach the cutter.
Machine shops wont touch it.
My gunsmith is building a "cup" for the cutter to sit in but it keeps wobble.
Yours looks perfect.
Nice job-
-
How did you get the lee case trimmer on the RCBS?
-
Did you drill and tap a case cutter? I took a case cutter to two machine shops locally and they all refused saying the material of the case cutter was too hard.
-
: )
-
thats the first vid i've seen when someone uses the debur and chamfer tool correctly! i can't figure out why they always use a lot of pressure when they use those tools. they aren't for trimming cases!
5:03
RCBS trim mate case prep centerby teddybaham2,301 views- 2:47
Lyman Case Prep Center Xpressby SinclairInc2,175 views
- 5:07
Final Case Prep Using the RCBS Trim Mateby MidLife20111,199 views
- 1:11
Exploding Shotgun Slugs 12 Boreby ballisticsukltd457,453 views
- 9:57
.308 Case Prep With The RCBS Case Prep Centerby Liberty4Ever34,315 views
- 6:35
RCBS Trim Mate w/ custom Lee case cutter holderby YellowMetalDriver2,939 views
- 5:53
.223 Case Preparation - RCBS Case Prep Centerby Liberty4Ever56,125 views
- 3:28
Using the RCBS Case Prep Centerby Bobseal2239,426 views
- 0:34
Forster Products--Outside Neck Turning: Proper Cutting Controlby forsterproducts13,639 views
- 7:58
Hornady Case Prep Centerby okieprepper5,046 views
- 0:31
RCBS Reloading Commercialby scheelsadmin4,573 views
- 1:25
RCBS Trim Pro Case Trimmerby rcbsreloading11,703 views
- 0:29
brass trimming with rcbs custom fit with drill for saving time.by helzmcfugly12,291 views
- 5:45
The RCBS Competition Seating Die Part 1by ammosmith15,903 views
- 5:28
RCBS trim mate case prep centerby barnettzack2,062 views
- 5:05
Hornady Case Prep Center Trimming Rifle Part II (30-06)by gavintoobe11,523 views
- 6:02
Jim Scoutten RCBS Single Stage Reloadingby MrSledgeHammerXXL68,473 views
- 2:42
Dillon RT1200 trimmerby gakido9921,386 views
- 8:14
RCBS uni flow accuracy testby schleprock137,673 views
- 3:16
Forster case trimmer with carbide 3-in-1 case mouth cutter and power adapter - HDby StrelokInDE12,655 views
Hey everyone~
Thanks for all the responses about the modification. It works really well.
To get the cutter drilled and tapped you have to take the temper out of it. While keeping the cutting end as cool as possible, heat the other end with a small torch. Let it cool slowly. Mark center, drill and tap it to fit a machine screw that fits the case prep center. Re-heat the unit and quench it in some water to harden it again. I've trimmed tons of rounds with no trouble.
Thanks again!
blfd1 8 months ago