Subaru SVX Sleeved Block Resurfacing
Loading...
Uploader Comments (fiatnutz)
Top Comments
-
4:36 ... probably the best PRO-open-deck explanation I've ever heard.
1,000 HP SVX!? Can you say SLEEEEEEPER! :)
2 years ago 6
-
He didnt say it was a 1000hp engine he said its "GOOD UP TO 1000hp" so if no boost is added then it will be the 220hp that will be bullet proof. to get 1000hp you need like 25psi+ and ARP bolts all around. New H Billet Rods and lower compression Forged pistons, free flow exhaust, and a whole dyno mapped ECU. thats how you can try to get to 1000hp.
2 years ago 4
All Comments (77)
-
@AlabamaCrackerHonkey Supras are 3.4 litres/3400cc stroked and they make well over 1000hp
-
@AlabamaCrackerHonkey There are 1000hp sti race cars.... I think those use a 2.0-2.5 liters of displacement.
-
You can squeeze a lot of power out of turbo engines but it sacrifices reliability. Just look at the 1000hp/litre F1 engines of the turbo era or 1000hp/litre top fuel dragster motors. That makes 300hp/litre look easy!
-
Hey John, can you take a look at a picture of a recently machined B20A5 (Honda Prelude 2.0si) and tell whether or not the surface finish *looks* okay? To me it looks like crap, but since you're a professional....just wonder what you think. Thanks so much. (please remove the --- from the url)
ht---tp://---i888.photobucket.
---com/albums/ac87/rev_of_rage /SANY0873.---jpg -
@fiatnutz So you would sleeve my vq35 hone it and resurface it for 2250? how much would it be if I provided you sleeves?
-
@itchyundies its half the block. the SVX is a 6 cylinder. EG33.
-
@fiatnutz thats actually not a bad price
-
quite a good beard
- 6:53
Subaru Sleeve Installationby fiatnutz33,890 views
- 4:35
Subaru STi Block Honingby fiatnutz183,039 views
- 1:53
CNC Porting Service for Subaru WRX Heads @ Costa Mesa R&D Automotive Machineby fiatnutz47,480 views
- 3:13
Subaru SVX Middle Piston Pin Installationby fiatnutz85,545 views
- 0:56
Project Import: 2005 Subaru STi Piston Failureby Projectimportcom15,767 views
- 0:22
Block Honingby carpartsmachine96,765 views
- 2:05
Honda H22A4by tommoparts20,740 views
- 3:48
Honda B-Series Sleevingby frknlow140,572 views
- 2:53
Subaru SVXby redsvx9376,372 views
- 2:31
Vanagon SVX Subaru testdriveby svxcarat143,275 views
- 1:19
Rotary (Wankle Engine) in a Velocity SE Aircraftby CBarberLaw330329,808 views
- 0:48
first svx with built motor and superchargerby facagoalie32,667 views
- 2:50
Subaru WRX EJ205 Engine Rebuild Part 4by DIYautotech9,520 views
- 4:25
Phil's 5spd Subaru SVX on the Dynoby cash6828,351 views
- 0:55
Subaru SVX Exhaust with Flowmaster Revving to 7500by guyver280z51,061 views
- 5:09
pulling pistons out of Subaru blockby dgvffd34,845 views
- 5:01
DARTON SLEEVES, Carlsbad, Ca.by DartonSleeves8,964 views
- 0:26
Subaru SVX highway run 2by wahwahrockwah11,466 views
- 0:28
Installing a sleeve in a small block chevy part 1by kolp094,122 views
John, I seriously doubt that you would be able to produce 1000HP from only 3.3 liters of displacement. Correct me if I'm wrong, but as a general rule, aren't most NA engines only good for about 100HP/1000cc and turbocharged about 200HP/1000cc?To make a 3.3 liter engine produce essentially 300HP/1000cc, you would need two turbos and I doubt it would be reliable.
AlabamaCrackerHonkey 7 months ago
@AlabamaCrackerHonkey - The Offy engines produced upwards of 1200 hp in their day with a big hair-dryer and they were 181 cid and 4-cylinders.
fiatnutz 7 months ago
If I send a stock EJ25 Subaru short-block to you, and you sleeve it, is the bore still 99.5mm like stock, or is the bore smaller after being sleeved? Alternatively, do you have any EJ25 short-block cores for use?
mbdulka 1 year ago
@mbdulka - I can push the bore to upp to 103mm. I have EJ25 cores.
fiatnutz 1 year ago
PRICE?! No one ever posts the damn prices. Maybe it's so high they don't want to scare anyone away.
lazzer408 2 years ago
4 cylinder: $1800
6 cylinder; $2250
Includes: sleeves, installation, honing to size, surface block, and alignhone JE...
fiatnutz 2 years ago 2