how to make worship flags

No description available.

Category:

People & Blogs

Tags:

• how
• to
• make
• worship
• flags

[higrantl]

To mrsmissme: the stick (pole) is 3/8-inch thick (diameter) and 4 feet 48 inches long. You can get it from most of hardware stores such as HomeDepot.

[higrantl]

The stick/pole used here is 3/8" thick (in diameter) and 4 feet long. You can get it from most of the hardware store.

[higrantl]

Thank you. The fabric used in this video is Tissue Lame, and its size is 44" x 50".

[flagsforworship]

I close the top end by hand stitching and then secure the flag at the top of the pole and then half way down with a thumb tack. The bottom end I secure with a generous dab from an ordinary glue stick which I get from a stationers. Barring the hand finishing, it takes about 2 minutes flat!

[puddingpan1]

thanks for the video. I'm thinking that the diluted all purpose glue may not keep the flag on the pole for too long, with vigorous use. Would you suggest reapplying the glue solution after a few uses, or maybe even stapling the flag to the rod in addition to the glue help to keep the flag intact? I have never made a flag from scratch only embellished finished ones. I don't want them to come apart while being used. Thanks for your help, just nervous.

[Deborahhackett]

I didn't understand what he said but just from watching I learned! :D

[cbrandstater]

How do you finish the edges of the cloth so it doesn't fray? What did you put on the end of the dowel to make it look finished?

[maefluffy]

Thank you for the video it was very informative. what did you use on the end of dowel rod?

[mrsmissme]

what size stick