Esky Honey Bee King v2 Helicopter 3900kv 10t Pinion Telebee.

Check out More Videos at www.rcpricewatch.com - Decals and Stickers Sponsored in part by www.capedecals.com , Here's a sweet video i made this morning. This was a ARF kit. I crashed my RTF and swapped parts into this beast.

Category:

Entertainment

Tags:

• Esky
• Honey
• Bee
• King
• v2
• RC
• Helicopter
• 3900kv
• Telebee
• Zoom
• Gyro
• HS-50
• Servo

[lordfly88]

My stock esky gyro just died (after maybe 10 hours of use), and I was thinking of getting one of the Telebee gyros. Would you recommend it? Does it hold well in HH mode?

[HeliPilotFlyer]

The Telebee Gyro's are an "Alright" Gyro Meaning that they are better than the stock gyro thats for sure and if your money is tight. Mine tended to Drift a bit. I was always making corrections to the tail all the time. If your using a DX-6/7 Radio some of this Drift can be removed but for the most part it's a PITA sometimes to deal with all of the time. Save a few bucks more and buy the Logictech 2100T Gyro. You'll be a lot more happier. Happy Flying.

[HeliPilotFlyer]

The Only Make Steel Pinions I Buy are made by Revco Hard Ones.

[pointnozzleaway]

are you using the stock blades ??

nice hovering by the way!!

[HeliPilotFlyer]

Thanks, My Hovering has Greatly Improved since this video was taken. I keep a lot of my videos here on YouTube so click on my user name to see the newer ones if your interested.

Yep,... those are the stock white wooden blades.

I've smashed those long ago now tho but i'm still using the same kind tho.

Check out:

rcpricewatch(DOT)com/rcpw/

[shadowflyer101]

i think 10T may be a little bit to hard on woody blades and plastic parts,i think you should lower it down to about a 9T

[HeliPilotFlyer]

10t is Perfect for this motor. A 9t would probably bring it down to a 3100kv with either a 12t or 13t. With this 3900kv motor and a 10t it doesnt have to work as hard. Make sure you buy the Steel Pinions Tho. The Align or Brass Pinions BLOW!

[chrisfunk2000]

I remember watching this vid before getting my HBK2 and thinking I HAVE to have a HH gyro. I've ordered one but have been flying for 3 weeks now without it and the stock one works fine for me. I had to adjust the gain a bit and slide the tail servo along the boom towards the front a few mm. I've also got similar head wobble though blades are balanced and tracked properly. Not sure what's wrong, no shafts seem to be bent. Time for a CNC head me thinks!

[chuanist]

A Telebee has been working great on my Blade CP Pro for over two years.

[hockeyguy17m]

Any idea how beneficial a 2100t will be over the Telebee with a cheap servo? I would like to not spend the money on a good servo right away if I could get away with it. Thanks

[doit86]

hey dude, nice vid.

Can you explain one thing to me as I always get confused is the throttle the vertical lift and drop for altitude or is it nose up or down to gain forward or backward speed?

Thanks

[armolite]

brilliant hovering skills there man, id have to agree with lipps tho it does look like youve got a mild head wobble going on.

i gotta get me one of those HH gyros before i fly my beeking.

good video.

[lipps199]

looks like you got a wobble

[dougsrccom]

Gatta love the King !!

[bigbikes750]

HeliPilotFlyer

Were abouts is Revco? Do they have a web site?? Great Hoviring by the way. Very Nice